Integrated Distance Meter - Leica 3D Disto User Manual

1.6.2
Integrated Distance
Meter
CAUTION
Labelling
1.800.561.8187 3D Disto, Safety Directions

Integrated Distance Meter

The Leica 3D Disto produces a visible laser beam which emerges from the front of the
instrument.
The laser product described in this section is classified as laser class 2 in accordance
with:
• IEC 60825-1 (2014-05): "Safety of laser products"
These products are safe for momentary exposures but can be hazardous for deliberate
staring into the beam. The beam may cause dazzle, flash-blindness and after-images,
particularly under low ambient light conditions.
Description
Wavelength
Maximum average radiant power
Pulse repetition frequency
Pulse duration
Beam divergence
From a safety perspective, class 2 laser products are not inherently safe for the eyes.
Precautions:
1) Avoid staring into the beam or viewing it through optical instruments.
2) Avoid pointing the beam at other people or at animals.
a
010746_001
a) Laser beam
www.
Value
620 nm - 690 nm
<1 mW
320 MHz
<1 ns
0.16 mrad x 0.6 mrad
Complies with 21 CFR 1040.10 and
1040.11 except for deviations
pursuant to Laser Notice Nr.50,
dated June 24, 2007
IEC 60285-1:2014
λ=620-690nm
Pav<1mW
tp<1ns
information@itm.com
.com
Laser Radiation
Do not stare into the
beam
Class 2 Laser Product
according to IEC 60825-
1
(2014 - 05)
Po  1.00 mW
 = 620 - 690 nm
10