Leica 3D Disto User Manual page 48

Point Shift Tool
1.800.561.8187 3D Disto, Software Applications
The Point Shift tool creates a new point by providing lateral movement value along
an existing line, offset and offset angle.
Step Description

Point-shift location is computed two-dimensionally in the X-Y plane. New
point height is computed by extrapolation of the selected line.
1. Target and measure two points or select an existing line.
2. Activate the CAD tools by a long tap on the line in the sketch area. Select
Point Shift.
Assistant and pop-up ask for the length movement.
3.
Enter a value and press OK.
The length shifted point is proposed:
4.
5.
Press to continue.
6. Assistant and pop-up ask for the direction angle for the offset.
Enter a value and press OK.
The angle for offset direction is proposed:
7.
www.
information@itm.com
.com
48