6.3
Description
6.3.1
Projector, Start
Measure the
Working Area
Point Design
1.800.561.8187
3D Disto, Software Applications
Projector
This application projects points or geometrical grids onto a horizontal, vertical or
sloped (= "free") plane. Design data in DXF or table format can be imported or a grid's
geometry can be entered manually.
010958_001
Workflow
Step
Description
1.
Press Menu » Applications » Projector.
2.
A pop-up offers three scan modes: horizontal, slope and vertical.
Select your preference according to the working area.
Pointfinder opens to measure the working area.
3.
Step
Description
1.
Measure all important objects that you want to consider (edges, corners,
etc.).
For horizontal mode only: the first measured point defines the level that all
following points refer to.
2.
If
is enabled, press this key to close the outline. Then measure further
points of interest (slope mode only).
3.
When all points are measured, press
Step
Description
1.
A pop-up offers two options to define the projection points: Grid mode for a
regular pattern and Import mode for individual DXF or CSV files.
Use the
key at any time to go back to the working area measurement.
www.
to continue.
information@itm.com
.com
51