Erasing User-Defined Text; Standard Paper For The Stack Bypass - Canon Color ImageRunner C3380 Reference Manual

4
Press [Done].

Erasing User-Defined Text

1
Press
[Register Characters for Page No./Watermark].
2
Select the text to erase ➞ press [Erase].
3
Press [Yes].
4
Press [Done].

Standard Paper for the Stack Bypass

You can set the paper size and type that the stack bypass uses beforehand. This
setting is useful if you always load the same paper size and type into the stack
bypass.
If the Stack Bypass Standard Settings are stored when using the optional Fax
function, you can also use the stack bypass to receive faxes.
IMPORTANT
When printing on special types of paper, such as heavy paper or transparencies, be sure
to correctly set the paper type, especially if you are using heavy paper. If the type of
paper is not set correctly, it could adversely affect the quality of the image. Moreover, the
fixing unit may become dirty and require a service repair, or the paper could jam.
NOTE
If you are using the stack bypass as a paper source for the Copy, Mail Box, and Fax
(Receive) functions, you must select the stack bypass when specifying the Drawer
Eligibility for APS/ADS setting. (See "Auto Paper Selection/Auto Drawer Switching," on p.
4-33.)
1
Press
[Stack Bypass Standard Settings].
(Additional Functions) ➞ [Common Settings] ➞
(Additional Functions) ➞ [Common Settings] ➞
Specifying Common Settings
4
4-47