Page 1 TS3400 series Online Manual English...
Page 2: Table Of Contents
Canon IJ Network Device Setup Utility Screen........
Page 3 Replacing a FINE Cartridge..........79 Replacing a FINE Cartridge.
Page 4 Checking the Power Plug/Power Cord..........Unplugging the Printer.
Page 5 Canon IJ Status Monitor Description........
Page 6 General Notes (Scanner Driver)..........265 Scanning Tips.
Page 7 ScanGear (Scanner Driver) Does Not Start......... . 327 Mechanical Problems.
Page 8 4103..............371 5011.
Page 9: Using Online Manual
Using Online Manual Operating Environment Symbols Used in This Document Touch-enabled Device Users (Windows) Printing Online Manual Trademarks and Licenses Screenshots in This Manual...
Page 10: Symbols Used In This Document
Symbols Used in This Document Warning Instructions that, if ignored, could result in death, serious personal injury, or property damage caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or property damage caused by incorrect operation of the equipment.
Page 11: Touch-Enabled Device Users (Windows)
Touch-enabled Device Users (Windows) For touch actions, you need to replace "right-click" in this document with the action set on the operating system. For example, if the action is set to "press and hold" on your operating system, replace "right-click" with "press and hold."...
Page 12: Trademarks And Licenses
(1998) are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. • Autodesk and AutoCAD are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries.
Page 13 EVENT SHALL APPLE OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Page 14 control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."...
Page 15 this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions. 6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
Page 16 PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ---- Part 2: Networks Associates Technology, Inc copyright notice (BSD) ----- Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved.
Page 17 IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 4: Sun Microsystems, Inc. copyright notice (BSD) ----- Copyright c 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A.
Page 18 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
Page 19 * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission.
Page 20 * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of ScienceLogic, LLC nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 21 DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS...
Page 22 Written by Joel Sherrill <joel@OARcorp.com>. COPYRIGHT (c) 1989-2000. On-Line Applications Research Corporation (OAR). Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software.
Page 23 ---------------------------- 2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
Page 24 `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'. This program is referred to as `a program using the FreeType engine'. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated in the file in its original, unmodified form as distributed in the original archive.
Page 25 Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license. 4. Contacts ----------- There are two mailing lists related to FreeType: o freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution.
Page 26 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 27 * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the CRYPTOGAMS nor the names of its copyright holder and contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 28 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 29 * Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation or other materials provided with the distribution. * Neither the name CryptoJS nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Page 30: Network
Network Available Connection Methods The following connection methods are available on the printer. • Wireless Connection Connect the printer and devices (e.g. computer/smartphone/tablet) using a wireless router. If you have a wireless router, we recommend you use one for wireless connection. ◦...
Page 31 Changing Network Settings See below for changing connection settings for the printer and computer/smartphone/tablet. • To change network connection method: Reconfiguration Method of Wi-Fi Connection Changing the Connection Mode • To add computer/smartphone/tablet to the printer: Connects to Another Computer via LAN/Changes from USB to LAN Connection •...
Page 32: Restrictions
Restrictions When connecting another device while a device (such as a computer) is already connected to the printer, connect it using the same connection method as the connected device. If you connect using a different connection method, the connection to the device in use will be disabled. Connect via wireless router •...
Page 33 • In Wireless Direct mode, you can connect up to five devices at the same time. If you try to connect a sixth device while five devices are already connected, an error will appear. If an error appears, disconnect a device that does not use the printer, and then redo the settings. •...
Page 34: Network Connection Tips
Network Connection Tips Default Network Settings Detect Same Printer Name Connects to Another Computer via LAN/Changes from USB to LAN Connection Printing Network Settings Reconfiguration Method of Wi-Fi Connection Connecting with Wireless Direct...
Page 35: Default Network Settings
Enable/disable IPv6 Enable Enable/disable WSD Enable Timeout setting 15 min. Enable/disable Bonjour Enable Service name Canon TS3400 series LPR protocol setting Enable RAW protocol Enable LLMNR Enable PictBridge communication (Enable/disable communication) Enable ("XX" represents alphanumeric characters.) * Default value depends on printer.
Page 36: Detect Same Printer Name
Detect Same Printer Name When the printer is detected during setup, plural printers with the same name may appear on the results screen. Select a printer with checking the printer settings against those on detection result screen. • For Windows: Check the printer's MAC address or serial to select the correct printer from the results.
Page 37: Connects To Another Computer Via Lan/Changes From Usb To Lan Connection
Connects to Another Computer via LAN/Changes from USB to LAN Connection To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, click here and perform setup.
Page 38: Printing Network Settings
Network Diagnostics Network diagnostics – Diagnostic Result Diagnostic result XXXXXXXX Result Codes Result codes XXXXXXXX Result Code Details Result code details http://canon.com/ijnwt Wireless LAN Wireless LAN Enable/Disable WPS PIN CODE WPS PIN code XXXXXXXX Infrastructure Infrastructure Enable/Disable 3-2-1 Signal Strength...
Page 39 3-2-7 Channel Channel XX (1 to 13) 3-2-8 Encryption Encryption method None/WEP/TKIP/AES 3-2-9 WEP Key Length WEP key length (bits) Inactive/128/64 3-2-10 Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSK 3-2-11 TCP/IPv4 TCP/IPv4 Enable/Disable 3-2-12 IP Address IP address XXX.XXX.XXX.XXX 3-2-13 Subnet Mask Subnet mask XXX.XXX.XXX.XXX 3-2-14 Default Gateway...
Page 40 3-2-28 Default Gateway3 Default gateway 3 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-29 Default Gateway4 Default gateway 4 XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX 3-2-33 IPsec IPsec setting Active/Inactive 3-2-34 Security Protocol Security method ESP/ESP & AH/AH/Blank (not selected) Wireless Direct Operation mode for Enable/Disable Wireless Direct 3-3-1 MAC Address MAC address XX:XX:XX:XX:XX:XX...
Page 41 RAW Printing RAW printing setting Enable/Disable Bonjour Bonjour setting Enable/Disable 5-10 Bonjour Service Name Bonjour service name Bonjour service name (Up to 52 alphanumeric characters) 5-11 LLMNR LLMNR setting Enable/Disable 5-12 SNMP SNMP setting Enable/Disable 5-13 PictBridge Commun. PictBridge Communica- Enable/Disable tion 5-14...
Page 42: Reconfiguration Method Of Wi-Fi Connection
Reconfiguration Method of Wi-Fi Connection Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct). • For Windows: See Changing the Connection Mode. ◦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility. Important Before you perform settings using IJ Network Device Setup Utility, turn on Easy wireless connect mode on the printer following the procedure below.
Page 43: Connecting With Wireless Direct
Connecting with Wireless Direct You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below. • Wireless connection (connecting devices via a wireless router) • Direct wireless connection (connecting devices directly without a wireless router) This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.
Page 44 • Depending on the device you are using, entering the password is required to connect a device to the printer via wireless LAN. Enter the password specified for the printer. You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
Page 45: Ij Network Device Setup Utility (Windows)
IJ Network Device Setup Utility (Windows) IJ Network Device Setup Utility Starting Up IJ Network Device Setup Utility Diagnosing and Repairing Network Settings Performing/Changing Network Settings List of Models Which Does Not Support Diagnosis and Repair Function List of Models Which Does Not Support IPv6 Configuration via USB Connection...
Page 46: Ij Network Device Setup Utility
IJ Network Device Setup Utility IJ Network Device Setup Utility allows you to diagnose or repair the network status, and to perform printer settings on network. Use IJ Network Device Setup Utility for: • Searching printers on network and performing initial network setup for detected printers •...
Page 47: Starting Up Ij Network Device Setup Utility
Start up IJ Network Device Setup Utility as shown below. • In Windows 10, select Start > (All apps > ) > Canon Utilities > IJ Network Device Setup Utility. • In Windows 8.1 or Windows 8, select IJ Network Device Setup Utility on the Start screen to start IJ Network Device Setup Utility.
Page 48: Diagnosing And Repairing Network Settings
Diagnosing and Repairing Network Settings IJ Network Device Setup Utility diagnoses and repairs computer settings or connection between the computer and printer when a problem (e.g. cannot print from a printer on the network) occurs. Important • Some models do not support diagnosis and repair function. For details: List of Models Which Does Not Support Diagnosis and Repair Function Follow the procedure below.
Page 49: Performing/Changing Network Settings
Performing/Changing Network Settings Canon IJ Network Device Setup Utility Screen Performing Network Settings...
Page 50: Canon Ij Network Device Setup Utility Screen
Items on Canon IJ Network Device Setup Utility Screen Menus on Canon IJ Network Device Setup Utility Screen Items on Canon IJ Network Device Setup Utility Screen Toolbar Items on Canon IJ Network Device Setup Utility Screen The screen below appears when you start up IJ Network Device Setup Utility and select Printer Network Setup.
Page 51 Appears after performing network setup and clicking Set to close the window. • Requires Setup Indicates the printer is required to perform Wi-Fi setup. Performing/Changing Wi-Fi Settings • Not Set Indicates the printer cannot be used on network, or IPv6 is disabled. Specify an IP address or enable IPv6 on Network Settings..
Page 52 Selecting a printer from the printer list displays its current status and what to do next. Menus on Canon IJ Network Device Setup Utility Screen This section describes menus on Canon IJ Network Device Setup Utility screen. A: Printer Settings menu...
Page 53 D: Help menu Help Menu Items on Canon IJ Network Device Setup Utility Screen Toolbar This section describes items on Canon IJ Network Device Setup Utility Screen toolbar. A: Perform wired or Wi-Fi setup. Note • This item has the same function as Network Settings... in the Printer Settings menu.
Page 54: Performing Network Settings
Performing Network Settings Performing/Changing Wired LAN Connection (Ethernet Cable) Settings Performing/Changing Wi-Fi Settings Assigning Printer Information...
Page 55: Performing/Changing Wired Lan Connection (Ethernet Cable) Settings
Performing/Changing Wired LAN Connection (Ethernet Cable) Settings Follow the procedure below to perform/change wired LAN settings. Note • For some models, you can perform network setup for a USB connected printer using IJ Network Device Setup Utility. Select USB on Switch View under the View menu to display printers for which you can perform setup.
Page 56 7. Perform/change settings. You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol. • IPv4 settings A: Use IPv4 address Always selected. (displayed in a gray out state) B: Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server functionality must be enabled on your router.
Page 57 A: Use IPv6 address Select when you use the printer with IPv6 environment. B: Use Stateless Address: Select when you use an IP address assigned automatically. Use a router compatible with IPv6. Note • This setting item is not available depending on the printer you are using. C: Use Manual Address: Select this option if no DHCP server functionality is available in your setup where you use the printer, or you want to use a fixed IP address.
Page 58: Performing/Changing Wi-Fi Settings
Performing/Changing Wi-Fi Settings Follow the procedure below to perform/change Wi-Fi settings. Important • Enable Easy wireless connect (Cableless setup) before performing printer setup. (Not required if you change the IP address.) For details, search for "NR049" on your printer's online manual and see the page shown.
Page 59 Select Wi-Fi and click OK. 6. Enter password and click OK. The Network Settings screen appears. 7. Perform/change settings. You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol. • IPv4/IPv6 settings A: Network Type: Select the Wi-Fi mode.
Page 60 The network name (SSID) for Wireless Direct appears while in Wireless Direct. C: Search... The Detected Wireless Routers screen is displayed to select a wireless router to connect to. For a wireless router already connected to the computer, Available is displayed on Communication Status.
Page 61 Enter the IP address, subnet mask, and default gateway. • IPv6 settings Note • If you select a USB connected printer on step 4, you cannot perform IPv6 settings depending on the printer you are using. For details, see List of Models Which Does Not Support IPv6 Configuration via USB Connection.
Page 62 D: Use DHCPv6: Select when you obtain an IP address using DHCPv6. Note • This setting item is not available depending on the printer you are using. 8. Click Set.
Page 63: Assigning Printer Information
Assigning Printer Information Follow the procedure below to assign/change printer location name or device name. The names appear on Device Name: and Location: on the Canon IJ Network Device Setup Utility screen. Note • If USB is selected from the pulldown menu on the toolbar, this setting item is not available.
Page 64: List Of Models Which Does Not Support Diagnosis And Repair Function
List of Models Which Does Not Support Diagnosis and Repair Function The following models does not support "Diagnose and Repair" function of IJ Network Device Setup Utility. • G4000 series • PRO-500 series • PRO-1000 series • MB2100 series • MB2700 series •...
Page 65: List Of Models Which Does Not Support Ipv6 Configuration Via Usb Connection
List of Models Which Does Not Support IPv6 Configuration via USB Connection For the following models, you can perform settings only for IPv4 using IJ Network Device Setup Utility. (You cannot perform settings for IPv6.) • iB4100 series • MG3000 series •...
Page 66 • TR9530 series • TS3300 series • E3300 series...
Page 67: Handling Paper, Originals, Fine Cartridges, Etc
Handling Paper, Originals, FINE Cartridges, etc. Loading Paper Loading Originals Replacing a FINE Cartridge...
Page 68: Loading Paper
Loading Paper Loading Plain Paper / Photo Paper...
Page 69: Loading Plain Paper / Photo Paper
• If you cut plain paper to a size of 5" x 7" (13 x 18 cm) or smaller to perform a trial print, it may cause a paper jam. Note • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Supported Media Types.
Page 70 3. Pull out the paper output tray (B) and the output tray extension (C). 4. Open paper guide (D). 5. Load paper vertically against the far right of the rear tray WITH THE PRINT SIDE FACING YOU.
Page 71 6. Adjust the paper guide with the paper left side. Do not slide the paper guide too hard against the paper. The paper may not be fed properly. Important • Always load paper in portrait orientation (E). Loading paper in landscape orientation (F) can cause paper jams.
Page 72 After loading paper on the rear tray, the Paper status and the current paper size flash on the LCD. 7. Press Paper Select button (H) to select a paper size according to the paper loaded on the rear tray and press OK button (I). Note •...
Page 73 quality. The wrong paper settings may cause poor printout color quality or scratches on the printed surface. If you notice blurring or uneven colors, increase the print quality setting and try printing again. • To prevent incorrect printing, this printer has a function that detects whether the size set for the paper loaded on the rear tray matches the paper settings.
Page 74: Loading Originals
Loading Originals Loading Originals on Platen Supported Originals...
Page 75: Loading Originals On Platen
Loading Originals on Platen 1. Open the document cover (A). 2. Load original WITH SIDE TO SCAN FACING DOWN on platen. Supported Originals Align the corner of the original with the alignment mark...
Page 76 Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break. Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass. Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down the original.
Page 77 Important • After loading the original on the platen, be sure to close the document cover before starting to copy or scan.
Page 78: Supported Originals
Supported Originals Item Details Types of originals • Text document, magazine, or newspaper • Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Size (width x height) Max. 8.5 x 11.7 in. (216 x 297 mm)
Page 79: Replacing A Fine Cartridge
Replacing a FINE Cartridge Replacing a FINE Cartridge Checking the Ink Status with the Ink Lamps on the Operation Panel Ink Tips...
Page 80: Replacing A Fine Cartridge
Replacing a FINE Cartridge When remaining ink cautions or errors occur, the error code will appear on the LCD to inform you of the error. In this state, the printer cannot print or scan. Check the error code and take appropriate action. When Error Occurred While using the printer, the periphery of the paper output slot may become dirty with ink.
Page 81 Check that printer is turned on. 2. Retract the paper output tray and the output tray extension. 3. Open the cover (C). The FINE cartridge holder (D) moves to the replacement position. Caution • Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the FINE cartridge holder until it stops completely.
Page 82 2. Remove the FINE cartridge (F). 5. Prepare a new FINE cartridge. 1. Take a new FINE cartridge out of its package and remove the protective tape (G) gently.
Page 83 Important • Do not touch the electrical contacts or print head nozzle on a FINE cartridge. The printer may not print properly if you touch them. 6. Install the FINE cartridge. 1. Insert the new FINE cartridge straight into the FINE cartridge holder all the way until it touches the back.
Page 84 Important • Check if the FINE cartridge is installed correctly. 7. Close the cover. Note • If the error code appears on the LCD after the cover is closed, take appropriate action. When Error Occurred Adjust the print head position. After replacing the FINE cartridge, align the print head.
Page 85: Checking The Ink Status With The Ink Lamps On The Operation Panel
Checking the Ink Status with the Ink Lamps on the Operation Panel Note • The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink level. If you install a used FINE cartridge, the indicated ink level of it may not be correct.
Page 86: Ink Tips
Ink Tips How is ink used for various purposes other than printing? Ink may be used for purposes other than printing. Ink is not only used for printing, but also for cleaning the print head to maintain the optimal printing quality. The printer has the function to automatically clean the ink jet nozzles to prevent clogging.
Page 87: If Printing Is Faint Or Uneven
If Printing Is Faint or Uneven Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Deep Print Head Cleaning Aligning the Print Head...
Page 88: Maintenance Procedure
Maintenance Procedure If print results are blurred, colors are not printed correctly, or print results are unsatisfactory (e.g. misaligned printed ruled lines), perform the maintenance procedure below. Important • Do not rinse or wipe the FINE cartridge. This can cause trouble with the FINE cartridge. Note •...
Page 89 If the problem is still not resolved: Replace the FINE cartridge. Step5 Replacing a FINE Cartridge Note • If the problem is still not resolved after replacing the FINE cartridge, contact your nearest Canon service center to request a repair.
Page 90 When the Print Results Are Not Even such as the Ruled Lines Are Misaligned: Align the print head. Step From the printer Aligning the Print Head From the computer • For Windows: Adjusting Print Head Position Manually • For macOS: Adjusting Print Head Position...
Page 91: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note • If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE Cartridge whose ink is low.
Page 92: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. 1. Check if there are missing lines in the pattern A or horizontal white streaks in the pattern B. If there are missing lines in the pattern A: C: Good D: Bad (lines are missing) If there are horizontal white streaks in the pattern B:...
Page 93: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary. Check that printer is turned on.
Page 94: Deep Print Head Cleaning
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. If the problem is still not resolved, replace the FINE cartridge with a new one. If the problem is still not resolved after replacing the FINE cartridge, contact your nearest Canon service center to request a repair.
Page 95: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note • If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the FINE cartridge whose ink is low.
Page 96 • If the print head alignment sheet was not printed correctly, press the Stop button, and redo this procedure from the beginning. 5. Place print head alignment sheet on platen. Place the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on the upper left corner of the sheet with the alignment mark 6.
Page 97: Cleaning
Cleaning Cleaning Exterior Surfaces Cleaning Platen and Document Cover Cleaning Paper Feed Rollers Cleaning Inside the Printer (Bottom Plate Cleaning)
Page 98: Cleaning Paper Feed Rollers
Cleaning Paper Feed Rollers If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. You need to prepare: a sheet of A4 or Letter-sized plain paper or cleaning sheet available on the market Check that printer is turned on.
Page 99 After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again. If the problem is not resolved after cleaning the paper feed roller, contact your nearest Canon service center to request a repair.
Page 100: Cleaning Inside The Printer (Bottom Plate Cleaning)
Cleaning Inside the Printer (Bottom Plate Cleaning) Remove stains from the inside of the printer. If the inside of the printer becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 101 3. Press the Setup button until 8 appears on the LCD. 4. Press the Black button or the Color button. The paper cleans the inside of the printer as it feeds through the printer. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again.
Page 102: Overview
Overview Safety Safety Precautions Regulatory Information WEEE (EU & EEA) Handling Precautions Canceling Print Jobs Storing Printed Images Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High Main Components and Their Use Main Components Power Supply...
Page 103: Safety
Safety Safety Precautions Regulatory Information WEEE (EU&EEA)
Page 104: Safety Precautions
Safety Precautions Safety Precautions • This manual contains important notices and safety precautions about your printer. Do not use the printer in ways other than described in the accompanying manuals, as this may result in fire, electric shock or other unexpected accidents. Safety standard marks and declarations are only valid for the supported voltages and frequencies in the applicable countries or regions.
Page 105 In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. • Moving the printer Hold the printer by its sides and carry it with both hands.
Page 106 Power Supply • Keep the area around the power outlet clear at all times so you can easily unplug the power cord if necessary. • Never remove the plug by pulling on the cord. General Notices • Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak. •...
Page 107: Regulatory Information
Regulatory Information Interference Do not use the printer around medical equipment or other electronic devices. Signals from the printer may interfere with the correct operation of these devices.
Page 108: Weee (Eu&Eea)
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon- europe.com/weee.
Page 109 U kunt ook het schema voor de afvoer van afgedankte elektrische en elektronische apparatuur (AEEA) raadplegen. Ga voor meer informatie over het inzamelen en recyclen van afgedankte elektrische en elektronische apparatuur naar www.canon- europe.com/weee.
Page 110 RAEE autorizado o con el servicio de recogida de basuras doméstico. Si desea más información acerca de la devolución y reciclado de RAEE, visite la web www.canon-europe.com/weee. Només per a la Unió Europea i a l’Espai Econòmic Europeu (Noruega, Islàndia i Liechtenstein)
Page 111 Yderligere oplysninger om, hvor du kan bortskaffe dit elektronikaffald med henblik på genanvendelse, får du hos de kommunale renovationsmyndigheder. Yderligere oplysninger om returnering og genanvendelse af affald af elektrisk og elektronisk udstyr får du ved at besøge www.canon- europe.com/weee.
Page 112 Du kan få mer informasjon om hvor du kan avhende utrangert utstyr til resirkulering ved å kontakte lokale myndigheter, et godkjent WEEE-program eller husholdningens renovasjonsselskap. Du finner mer informasjon om retur og resirkulering av WEEE-produkter på www.canon-europe.com/weee. Vain Euroopan unionin sekä ETA:n (Norja, Islanti ja Liechtenstein) alueelle.
Page 113 Lisätietoja sähkö- ja elektroniikkalaiteromun keräyksestä ja kierrätyksestä on osoitteessa www.canon-europe.com/weee. Endast för Europeiska unionen och EES (Norge, Island och Liechtenstein) Den här symbolen visar att produkten enligt WEEE-direktivet (2012/19/EU) och nationell lagstiftning inte får sorteras och slängas som hushållsavfall. Den här produkten ska lämnas in på en därför avsedd insamlingsplats, t.ex.
Page 114 WEEE lub skontaktować się z przedsiębiorstwem zajmującym się wywozem odpadów domowych. Więcej informacji o zwracaniu i recyklingu zużytego sprzętu elektrycznego i elektronicznego znajduje się w witrynie www.canon-europe.com/weee. Platí len pre štáty Európskej únie a EHP (Nórsko, Island a Lichtenštajnsko)
Page 115 EEIA struktūru vai sadzīves atkritumu apsaimniekošanas iestādi. Lai saņemtu plašāku informāciju par elektrisko un elektronisko iekārtu nodošanu pārstrādei, apmeklējiet tīmekļa vietni www.canon-europe.com/weee. Tik Europos Sąjungai ir EEE (Norvegijai, Islandijai ir Lichtenšteinui) Šis ženklas reiškia, kad gaminio negalima išmesti su buitinėmis atliekomis, kaip yra nustatyta Direktyvoje...
Page 116 į savo miesto valdžios institucijas, atliekų tvarkymo organizacijas, patvirtintų EEĮ atliekų sistemų arba jūsų buitinių atliekų tvarkymo įstaigų atstovus. Išsamesnės informacijos apie EEĮ atliekų grąžinimo ir perdirbimo tvarką galite rasti apsilankę tinklalapyje www.canon- europe.com/weee. Samo za Evropsko unijo in EGP (Norveška, Islandija in Lihtenštajn) Ta simbol pomeni, da tega izdelka v skladu z direktivo OEEO (2012/19/EU) in državno zakonodajo ne...
Page 117 DEEE aprobată sau serviciul de colectare a deşeurilor menajere. Pentru mai multe informaţii privind returnarea şi reciclarea produselor DEEE, vizitaţi www.canon-europe.com/ weee. Samo za Europsku uniju i EEZ (Norveška, Island i Lihtenštajn) Ovaj simbol pokazuje da se ovaj proizvod ne smije odlagati s kućnim otpadom sukladno WEEE Direktivi...
Page 118 će doprineti efikasnom korišćenju prirodnih resursa. Za više informacija o tome gde možete da predate vašu staru opremu radi recikliranje, vas molimo, da kontaktirate lokalne gradske vlasti, komunalne službe, odobreni plan reciklaže ili Gradsku čistoću. Za više informacija o vraćanju i recikliranju WEEE proizvoda, posetite stranicu www.canon-europe.com/weee.
Page 119: Handling Precautions
Handling Precautions Canceling Print Jobs Storing Printed Images Legal Restrictions on Scanning/Copying Printer Handling Precautions Transporting Your Printer When Repairing, Lending, or Disposing of the Printer Keeping Print Quality High...
Page 120: Legal Restrictions On Scanning/Copying
Legal Restrictions on Scanning/Copying Scanning, printing, copying, or modifying copies of the following may be punishable under law. This list is non-exhaustive. When in doubt, check with a local legal representative. • Paper money • Money orders • Certificates of deposit •...
Page 121: Printer Handling Precautions
Printer Handling Precautions Do not place any object on the document cover! Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the printer to malfunction. Also, place the printer where objects will not fall on it.
Page 122: Transporting Your Printer
Transporting Your Printer When relocating the printer for changing your living place or repairing it, make sure of the following. Important • Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
Page 123: When Repairing, Lending, Or Disposing Of The Printer
When Repairing, Lending, or Disposing of the Printer If you have entered personal data, passwords and/or other security settings on the printer, such information may be stored in the printer. When sending the printer for repair, lending or transferring the printer to another person, or disposing of the printer, please be sure to follow the steps below in order to delete such information and prevent third parties from accessing it.
Page 124: Keeping Print Quality High
Keeping Print Quality High The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Note • Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or paint- stick, or bleed if water or sweat comes in contact with the printed area.
Page 125: Main Components And Their Use
Main Components and Their Use Main Components Power Supply Indication of LCD...
Page 126: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 127: Front View
Front View A: Document Cover Open to load an original on the platen. B: Paper Support Open to load paper on the rear tray. C: Paper Guide Align with the left side of the paper stack. D: Rear Tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
Page 128 H: Operation Panel Use to change the settings of the printer or to operate it. Operation Panel I: Platen Load an original here.
Page 129: Rear View
Rear View A: Power Cord Connector Plug in the supplied power cord. B: USB Port Plug in the USB cable to connect the printer with a computer. Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while the printer is printing or scanning with the computer. This can cause trouble.
Page 130: Inside View
Inside View A: ink cartridge lock lever Secures the installed FINE cartridge. B: FINE Cartridge Holder Install the FINE cartridge. The color FINE cartridge should be installed into the left slot and the black FINE cartridge should be installed into the right slot. C: FINE Cartridge (ink cartridges) A replaceable cartridge that integrates print head and ink tank.
Page 131: Operation Panel
Operation Panel A: ON button Turns the power on or off. Before turning on the power, make sure that the document cover is closed. B: ON lamp Lights after flashing when the power is turned on. C: Wireless select button Switch between Wi-Fi and Wireless Direct, or enable/disable them.
Page 132 H: Ink lamps Light or flash when ink runs out, etc. The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge status. I: LCD (Liquid Crystal Display) Displays the number of copies, maintenance code, error code or various icons. Indication of LCD J: Paper Select button Select the paper size of the printer.
Page 133: Power Supply
Power Supply Checking that Power Is On Turning the Printer On and Off Checking the Power Plug/Power Cord Unplugging the Printer...
Page 134: Checking That Power Is On
Checking that Power Is On The ON lamp is lit when the printer is turned on. Even if the LCD is off, if the ON lamp is lit, the printer is on. Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 135: Turning The Printer On And Off
Turning the Printer On and Off Turning on the printer 1. Press the ON button to turn on the printer. The ON lamp flashes and then remains lit. Checking that Power Is On Note • It may take a while for the printer to start printing immediately after you turn on the printer. •...
Page 136 Important • When you unplug the power cord after turning off the printer, be sure to confirm that the ON lamp is off. Note • You can set the printer to automatically turn off when no operations are performed or no print jobs are sent to the printer for a certain interval.
Page 137: Checking The Power Plug/Power Cord
Checking the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. • The power plug/power cord is hot. • The power plug/power cord is rusty. •...
Page 138: Unplugging The Printer
Unplugging the Printer To unplug the power cord, follow the procedure below. Important • When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.
Page 139: Indication Of Lcd
Indication of LCD The number of copies, maintenance code, error code or various icons is displayed on the LCD. A: Network status Displays the current network status. Wi-Fi and Wireless Direct are enabled. Wi-Fi is enabled. Wireless Direct is enabled. When the icon and the icon are not displayed, Wi-Fi and Wireless Direct are disabled.
Page 140 The number from 0 to 19 or alphabet is displayed. D: Paper status Appears during paper loaded on the rear tray. This icon also flashes while you select the paper size after pressing the Paper Select button. * This icon does not appear if the paper mismatch detection function is disable. E: Paper size Displays the current paper size.
Page 141: Changing Settings
Changing Settings Changing Printer Settings from Your Computer (Windows) Changing Printer Settings from Your Computer (macOS) Changing Settings from Operation Panel...
Page 142: Changing Printer Settings From Your Computer (Windows)
Changing Printer Settings from Your Computer (Windows) Changing the Print Options Registering a Frequently Used Printing Profile Setting the Ink to be Used Managing the Printer Power Changing the Printer Operation Mode...
Page 143: Changing The Print Options
Changing the Print Options You can change the detailed printer driver settings for print data that is sent from an application software. Specify this option if you encounter print failures such as part of an image data being cut off. 1.
Page 144: Registering A Frequently Used Printing Profile
Registering a Frequently Used Printing Profile You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab. Unnecessary printing profiles can be deleted at any time. Registering a Printing Profile 1. Open the printer driver setup window 2.
Page 145 In the Save Commonly Used Settings dialog box, click OK to save the print settings and return to the Quick Setup tab. The name and icon are displayed in Commonly Used Settings. Important • To save the page size, orientation, and number of copies that was set in each sheet, click Options..., and check each item.
Page 146: Setting The Ink To Be Used
Setting the Ink to be Used This feature enables you to specify the most appropriate FINE cartridge among installed FINE cartridges according to an intended use. 1. Open the printer driver setup window 2. Click Print Options... on the Page Setup tab The Print Options dialog box appears.
Page 147: Managing The Printer Power
Managing the Printer Power This function allows you to manage the printer power from the Canon IJ Printer Assistant Tool. Power Off The Power Off function turns off the printer. When you use this function, you will not be able to turn the printer on from the Canon IJ Printer Assistant Tool.
Page 148 Note • When the printer is turned off, the Canon IJ Status Monitor message varies depending on the Auto Power On setting. When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable,...
Page 149: Changing The Printer Operation Mode
3. If necessary, complete the following settings: Align heads manually Usually, the Print Head Alignment function in the Canon IJ Printer Assistant Tool is set to automatic head alignment, but you can change it to manual head alignment. If the printing results of automatic Print Head Alignment are not satisfactory, perform manual head alignment.
Page 150 dries, increase the ink drying wait time. Reducing the ink drying wait time speeds up printing. 4. Apply the settings Click OK and when the confirmation message appears, click OK. The printer operates with the modified settings hereafter.
Page 151: Changing Settings From Operation Panel
Changing Settings from Operation Panel Setting Items on Operation Panel Quiet setting Turning on/off Printer Automatically Initializing Printer Settings...
Page 152: Setting Items On Operation Panel
Setting Items on Operation Panel Setup No. Details Nozzle Check Cleaning Deep Cleaning Printing/scanning print head alignment sheet Scanning print head alignment sheet Printing head alignment value Roller cleaning Bottom plate cleaning Running WPS (PIN code method) Resetting LAN settings Quiet setting Auto power off setting * Auto power on setting *...
Page 153: Quiet Setting
Quiet setting Enables this function on the printer if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. Check that printer is turned on. 2. Press the Setup button until 11 appears on the LCD. 3.
Page 154: Initializing Printer Settings
Initializing Printer Settings You can initialize the printer settings. Important • When using the printer over Wi-Fi, note that initialization erases all network settings on the printer, and printing operation from a computer over Wi-Fi may become impossible. To use the printer over Wi-Fi, perform setup according to the instructions on our website.
Page 155: Specifications
Specifications General Specifications Interface USB Port: Hi-Speed USB * Network Port: Wi-Fi: IEEE802.11n / IEEE802.11g / IEEE802.11b * A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.
Page 156 Scan Specifications Scanner driver Windows: TWAIN 1.9 Specification, WIA Maximum scanning size A4/Letter, 8.5 x 11.7 in. (216 x 297 mm) Optical resolution (horizontal x 600 x 1200 dpi * vertical) * Optical Resolution represents the maximum sampling rate based on ISO 14473.
Page 157 10.12.6 - macOS 10.15 Other Supported OS iOS, iPadOS, Android, Chrome OS Some functions may not be available with the supported OS. Refer to the Canon web site for details. Information in this manual is subject to change without notice.
Page 158: Information About Paper
Information about Paper Supported Media Types Paper Load Limit Unsupported Media Types Handling Paper Print Area...
Page 159: Supported Media Types
Canon website. • Genuine Canon paper is not available in some countries or regions. Note that in the United States, Canon paper is not sold by model number. Instead, purchase paper by name.
Page 160 Note • When printing photos saved on a PictBridge (Wi-Fi) compliant device, you must specify the page size and media type. Printing from Digital Camera Page Sizes You can use the following page sizes. Note • Page sizes and media types the printer supports differ depending on the OS you are using. Standard sizes: •...
Page 161: Paper Load Limit
Note • Page sizes and media types differ depending on the country or region where the paper is sold. For details on page sizes and media types, access the Canon website. Paper Load Limits of Rear Tray Genuine Canon Paper Paper for printing documents: Media Name <Model No.>...
Page 162 Paper for printing documents: Media Name <Model No.> Paper Output Tray Canon Red Label Superior <WOP111> Approx. 10 sheets Canon Océ Office Colour Paper <SAT213> Paper other than Genuine Canon Paper Common Name Paper Output Tray Plain Paper (including recycled paper) Approx.
Page 163: Unsupported Media Types
Unsupported Media Types Do not use the following types of paper. Using such paper will cause not only unsatisfactory results, but also the printer to jam or malfunction. • Folded, curled, or wrinkled paper • Damp paper • Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when printing on paper smaller than A5) •...
Page 164: Handling Paper
Handling Paper • Be careful not to rub or scratch the surfaces of any types of paper when handling. • Hold the paper as closely as possible to its edges and try not to touch the printing surface. The print quality may be degraded if the printing surface is smudged with sweat or oil that comes from your hands.
Page 165: Printing
Printing Printing from Computer Printing from Smartphone/Tablet Printing from Digital Camera Using PIXMA/MAXIFY Cloud Link Paper Settings...
Page 166: Printing From Computer
Printing from Computer Printing from Application Software (Windows Printer Driver) Printing from Application Software (macOS AirPrint) Printing Using Canon Application Software Printing from Chrome OS...
Page 167: Printing From Application Software (Windows Printer Driver)
Printing from Application Software (Windows Printer Driver) Basic Printing Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Printer Driver Description Updating the MP Drivers...
Page 168: Basic Printing Setup
Basic Printing Setup This section describes settings on the Quick Setup tab used for basic printing. Check that printer is turned on Load paper in printer 3. Open printer driver's setup screen 4. Select frequently used settings On the Quick Setup tab, use Commonly Used Settings to select from predefined print settings. When you select a print setting, the settings for Additional Features, Media Type, and Printer Paper Size automatically switch to the predefined values.
Page 169 Important • The print quality selections will differ depending on which print setting you select. 6. Click OK The printer will now print using these settings. Important • When you select Always Print with Current Settings, the settings on the Quick Setup, Main, and Page Setup tabs are saved, and those settings are used in subsequent printings.
Page 170 Note • If the paper size in the printer driver does not match the one configured on the printer, an error may occur. For instructions on what to do if an error occurs, see "Paper Settings."...
Page 171: Paper Settings On The Printer Driver
Media name <Model No.> Media Type in the printer driver Canon Red Label Superior <WOP111> Plain Paper Canon Océ Office Colour Paper <SAT213> Plain Paper Canon genuine papers (Photo Printing) Media name <Model No.> Media Type in the printer driver Photo Paper Plus Glossy II <PP-201/PP-208/PP-301>...
Page 172: Various Printing Methods
Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Perform Borderless Printing Scaled Printing Page Layout Printing Duplex Printing Printing on Postcards...
Page 173: Setting A Page Size And Orientation
Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
Page 174: Setting The Number Of Copies And Printing Order
Setting the Number of Copies and Printing Order You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2. Specify the number of copies to be printed For Copies on the Page Setup tab, specify the number of copies to be printed. 3.
Page 175 • Print from Last Page: /Collate: • Print from Last Page: /Collate: 4. Click OK When you perform print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver.
Page 176: Perform Borderless Printing
Perform Borderless Printing The borderless printing function allows you to print data without any margin by enlarging the data so that it extends slightly off the paper. In standard printing, margins are created around the document area. However, in borderless printing function, these margins are not created. When you want to print data such as a photo without providing any margin around it, set borderless printing.
Page 177 3. Check the paper size Check the Page Size list. When you want to change it, select another page size from the list. The list displays only sizes that can be used for borderless printing. 4. Adjust the amount of extension from the paper If necessary, adjust the amount of extension using the Amount of Extension slider.
Page 178 Note • When the Amount of Extension slider is set to the leftmost position, image data will be printed in the full size. If you set this when printing the address side of a postcard, the postal code of the sender is printed in the correct position.
Page 179: Scaled Printing
Scaled Printing 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software. 4.
Page 180 Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Click OK When you perform print, the document will be printed with the specified scale. Important •...
Page 181: Page Layout Printing
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver.
Page 182 Page Layout To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box.
Page 183: Duplex Printing
Duplex Printing You can also set duplex printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set duplex printing Check the Duplex Printing (Manual) check box on the Page Setup tab. 3. Select the layout Select Normal-size, Fit-to-Page, Scaled, or Page Layout from the Page Layout list.
Page 184 (Manual) and Stapling Side appear grayed out and are unavailable. Note • If the back side of the paper becomes smudged during duplex printing, perform Bottom Plate Cleaning in the Canon IJ Printer Assistant Tool. Related Topics Cleaning Inside the Printer...
Page 185: Printing On Postcards
Printing on Postcards Load postcard on the printer 2. Open the printer driver setup window 3. Select commonly used settings Display the Quick Setup tab, and for Commonly Used Settings, select Standard. 4. Select the media type For Media Type, select Ink Jet Hagaki (A), Ink Jet Hagaki, Hagaki K (A), Hagaki K, Hagaki (A), or Hagaki.
Page 186: Overview Of The Printer Driver
Overview of the Printer Driver Canon IJ Printer Driver Opening Printer Driver's Setup Screen Canon IJ Status Monitor Checking Ink Status from Your Computer Instructions for Use (Printer Driver)
Page 187: Canon Ij Printer Driver
Canon IJ Printer Driver The Canon IJ printer driver (simply called printer driver below) is software that you install onto your computer so that it can communicate with the printer. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer.
Page 188: Opening Printer Driver's Setup Screen
Opening Printer Driver's Setup Screen You can display the printer driver's setup screen from your application software or by clicking the printer icon. Displaying the Printer Driver's Setup Screen from Your Application Software Perform this procedure to set up the print settings during printing. 1.
Page 189: Canon Ij Status Monitor
• The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. When Errors Occur The Canon IJ Status Monitor is automatically displayed if an error occurs (e.g., if the printer runs out of paper or if the ink is low).
Page 190 In such cases, take the appropriate action as described. Related Topic Canon IJ Status Monitor Description...
Page 191: Checking Ink Status From Your Computer
Ink status is displayed as an illustration. Note • The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. • When you receive a notice about the remaining ink level, a mark appears on the left of the ink icon.
Page 192: Instructions For Use (Printer Driver)
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled.
Page 193 7. Start printing. • If bitmap printing is enabled in Adobe Illustrator (Adobe Systems Incorporated), printing may take time or some data may not be printed. Print after unchecking the Bitmap Printing check box in the Print dialog box.
Page 194: Printer Driver Description
Printer Driver Description Quick Setup Tab Description Main Tab Description Page Setup Tab Description Maintenance Tab Description Canon IJ Status Monitor Description...
Page 195: Quick Setup Tab Description
Quick Setup Tab Description The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the printer automatically switches to the preset items. Commonly Used Settings The names and icons of frequently used printing profiles are registered. When you select a printing profile according to the purpose of the document, settings that match the purpose are applied.
Page 196 If Page Size, Orientation, and Copies were set from the application software, those settings have priority. Save... Displays the Save Commonly Used Settings dialog box. Click this button when you want to save the information that you set on the Quick Setup, Main, and Page Setup tabs to Commonly Used Settings.
Page 197 Prints the document by rotating it 90 degrees relative to the paper feed direction. You can change the rotation direction by going to the Canon IJ Printer Assistant Tool, opening the Custom Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape] check box.
Page 198 To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. The Set... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desired settings. High Gives priority to print quality over printing speed. Standard Prints with average speed and quality.
Page 199 Options... Opens the Save Commonly Used Settings dialog box. Changes the details of printing profile to be saved. Save Commonly Used Settings dialog box Select the icons of the printing profiles to be registered to Commonly Used Settings, and change the items to be saved in the printing profiles.
Page 200 Duplex Printing Perform Borderless Printing Printing a Color Document in Monochrome Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Contrast Setting Paper Dimensions (Custom Size) Setting a Page Size and Orientation Setting the Number of Copies and Printing Order...
Page 201: Main Tab Description
Main Tab Description The Main tab allows you to create a basic print setup in accordance with the media type. Unless special printing is required, normal printing can be performed just by setting the items on this tab. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
Page 202 Draft This setting is appropriate for test printing. Custom Select this when you want to set the printing quality level individually. Set... Select Custom for Print Quality to enable this button. Open the Custom dialog box. You can then individually set the print quality level. Color/Intensity Selects color adjustment method.
Page 203 Note • The High, Standard, or Draft print quality modes are linked with the slider bar. Therefore when the slider bar is moved, the corresponding quality and value are displayed on the left. This is the same as when the corresponding radio button is selected for Print Quality on the Main tab. Color Adjustment Tab This tab allows you to adjust the color balance by changing the settings of the Cyan, Magenta, Yellow, Brightness, and Contrast options.
Page 204 • When Grayscale Printing is checked on the Main tab, Color Correction appears grayed out and is unavailable. Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. Adjusts the colors by using an ICC profile when printing. Important •...
Page 205: Page Setup Tab Description
Prints the document by rotating it 90 degrees relative to the paper feed direction. You can change the rotation direction by going to the Canon IJ Printer Assistant Tool, opening the Custom Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape] check box.
Page 206 Rotate 180 degrees Prints the document by rotating it 180 degrees against the paper feed direction. The width of print area and the amount of extension that are configured in other application software will be reversed vertically and horizontally. Printer Paper Size Selects the size of paper actually loaded into the printer.
Page 207 Specify... Opens the Page Layout Printing dialog box. Click this button to set details on page layout printing. Tiling/Poster This function enables you to enlarge the image data and divide the enlarged data into several pages to be printed. You can also glue together these sheets of paper to create large printed matter, such as a poster.
Page 208 Important • When the application software that you used to create the document has the same function, give priority to the printer driver settings. However, if the print results are not acceptable, specify the function settings on the application software. When you specify the number of copies and the printing order with both the application and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled.
Page 209 Tiling/Poster Printing dialog box This dialog box allows you to select the size of the image to be printed. You can also make settings for cut lines and paste markers which are convenient for pasting together the pages into a poster. The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
Page 210 Insert blank page Selects whether to print the document on one side or both sides of the booklet. Check this check box to print the document on one side of the booklet and select the side to be left blank from the list. Margin Specifies the width of the stapling margin.
Page 211 Ungroup Papers Sets the display method of Media Type, Page Size, and Printer Paper Size. To display the items separately, select the check box. To display the items as a group, clear the check box. Do not allow application software to compress print data Compression of the application software print data is prohibited.
Page 212 Stamp/Background dialog box The Stamp/Background dialog box allows you to print a stamp and/or background over or behind the document pages. In addition to the pre-registered ones, you can register and use your original stamp or background. Stamp Stamp printing is a function that prints a stamp over a document. Check this check box and select a title from the list to print a stamp.
Page 213 Stamp Type Specifies the stamp type. Select Text to create a stamp with characters. Select Bitmap to create with a bitmap file. Select Date/Time/User Name to display the creation date/time and user name of the printed document. The setting items in the Stamp tab change depending on the selected type. •...
Page 214 Transparent white area Specifies whether to make white-filled areas of the bitmap transparent. Check this check box to make white-filled areas of the bitmap transparent. Note • Click Defaults to set Stamp Type to text, Stamp Text to blank, TrueType Font to Arial, Style to Regular, Size to 36 points, Outline unchecked, and Color to gray with the RGB values (192, 192, 192).
Page 215 Delete Deletes an unnecessary stamp. Specify the title of an unnecessary stamp from the Stamps list, and click this button. Background Tab The Background tab allows you to select a bitmap file (.bmp) to be used as a background or determine how to print the selected background.
Page 216 Delete Deletes an unnecessary background. Specify the title of an unnecessary background from the Backgrounds list, and then click this button. Related Topics Setting Paper Dimensions (Custom Size) Setting a Page Size and Orientation Perform Borderless Printing Fit-to-Page Printing Scaled Printing Page Layout Printing Tiling/Poster Printing Booklet Printing...
Page 217: Maintenance Tab Description
Maintenance Tab Description The Maintenance tab allows you to start the Canon IJ Printer Assistant Tool or check the status of the printer. Maintenance and Preferences Canon IJ Printer Assistant Tool is started. You can perform printer maintenance or change the settings of the printer.
Page 218 Important • If the font for displaying the language of your choice is not installed in your system, the characters will be garbled.
Page 219: Canon Ij Status Monitor Description
FINE cartridge types and ink levels can be confirmed. Overview of the Canon IJ Status Monitor The Canon IJ Status Monitor uses images, icons, and messages to display the printer status and the ink status. During printing, you can check information about the document being printed and the print progress.
Page 220 Displays the Canon IJ Status Monitor in front of other windows. Display Warning Automatically When a Low Ink Warning Occurs Starts the Canon IJ Status Monitor window as a pop-up, and displays it in front of the other windows when a low ink warning occurs. Start when Windows is Started Automatically starts the Canon IJ Status Monitor when Windows is started.
Page 221 This window allows you to download the route certificate, register it to the browser, and disable warning displays. Help Menu Select this menu to display Help information for the Canon IJ Status Monitor including version and copyright information. Related Topic...
Page 222: Installing The Mp Drivers
Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers for your model. 1. Start the installer Double-click the icon of the downloaded file. The installation program starts. Important • A confirmation/warning dialog box may appear when starting, installing or uninstalling software. This dialog box appears when administrative rights are required to perform a task.
Page 223: Printing Using Canon Application Software
Printing Using Canon Application Software Easy-PhotoPrint Editor Guide...
Page 224: Printing From Smartphone/Tablet
Printing from Smartphone/Tablet Printing from iPhone/iPad/iPod touch (iOS) Printing from Smartphone/Tablet (Android)
Page 225: Paper Settings
Paper Settings By registering the paper size of paper loaded on the rear tray, you can prevent the printer from misprinting by displaying the error code before printing starts when the paper size of the loaded paper differs from the print settings.
Page 226 When the paper size setting for printing is different from the paper size setting set to the printer: • Paper size setting for printing: A5 • Paper size setting set to the printer: A4 When you start printing, an error code appears on the LCD. Select one of the operations below.
Page 227 Printing after replacing paper You print after replacing paper loaded on the rear tray. For example, when the paper size setting for printing is A5 and the paper size setting set to A4 on the LCD, you load A5 sized paper before you start printing. Set the paper size setting on the LCD depending on the loaded paper on the rear tray after replacing paper.
Page 228: Copying
Copying Making Copies on Plain Paper Basics Copying on Photo Paper Copying Using Smartphone or Tablet...
Page 229: Making Copies On Plain Paper
Making Copies on Plain Paper Load the original on the platen to copy on the A4, Letter, B5, or A5 sized plain paper. Check that printer is turned on. Load paper. Load A4, Letter, B5, or A5 sized plain paper. Select A4, LTR, B5, or A5 size for paper size setting on the LCD.
Page 230 • If you press the Color button or the Black button when the paper size is not selected on the LCD, an error code appears on the LCD. When Error Occurred Note • The original is copied at the same magnification on plain paper. The original is copied on plain paper with borders.
Page 231: Copying On Photo Paper
Copying on Photo Paper Load the original on the platen to copy on the KG/10x15cm(4x6), 13x18cm(5x7), or Square size (127x127mm) photo paper. Check that printer is turned on. Load paper. Load KG/10x15cm(4x6), 13x18cm(5x7), or Square size (127x127mm) photo paper. Select KG 4"x6"/10x15cm, 2L 5"x7"/13x18cm, or 5"x5"/13x13cm size for paper size setting on the LCD.
Page 232 • If you press the Color button or the Black button when the paper size is not selected on the LCD, an error code appears on the LCD. When Error Occurred Note • The original is copied automatically by reducing/enlarging to fit the paper size of photo paper. The original is copied on photo paper without borders.
Page 233: Scanning
Scanning Scanning from Computer (macOS) Scanning from Computer (Windows)
Page 234: Scanning From Computer (Windows)
Scanning from Computer (Windows) Scanning According to Item Type or Purpose (IJ Scan Utility) IJ Scan Utility Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Creating/Editing PDF Files Setting Passwords for PDF Files Editing Password-Protected PDF Files Scanning Using Application Software (ScanGear) Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings...
Page 235: Scanning According To Item Type Or Purpose (Ij Scan Utility)
Scanning According to Item Type or Purpose (IJ Scan Utility) IJ Scan Utility Features Scanning Easily (Auto Scan) Basics Scanning Documents and Photos Creating/Editing PDF Files Setting Passwords for PDF Files Editing Password-Protected PDF Files...
Page 236: Ij Scan Utility Features
IJ Scan Utility Features Use IJ Scan Utility to scan and save documents, photos, or other items at one time by simply clicking the corresponding icon. Multiple Scanning Modes Auto allows for one click scanning with default settings for various items. Document will sharpen text in a document or magazine for better readability, and Photo is best suited for scanning photos.
Page 237 Note • To set the applications to integrate with, see Settings Dialog Box.
Page 238: Scanning Easily (Auto Scan)
Scanning Easily (Auto Scan) Auto Scan allows for automatic detection of the type of the item placed on the platen. Important • The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver), and then scan again. Photos with a whitish background Items printed on white paper, hand-written text, business cards, and other unclear items Thin items...
Page 239: Scanning Documents And Photos
Scanning Documents and Photos Scan items placed on the platen with settings suitable for documents or photos. Save documents in formats such as PDF and JPEG, and photos in formats such as JPEG and TIFF. 1. Place the item on the platen. Positioning Originals (Scanning from Computer) 2.
Page 240: Creating/Editing Pdf Files
Creating/Editing PDF Files You can create PDF files by scanning items placed on the platen. Add, delete, rearrange pages or make other edits in the created PDF files. Important • You can create or edit up to 100 pages of a PDF file at one time. •...
Page 241 5. Click (Scan) on Toolbar. Scanning starts. Note • To open a file saved on the computer, click Open... from the File menu, and then select the file you want to edit. • You can switch the view with the Toolbar buttons. For details, see PDF Edit Screen. 6.
Page 242 When deleting pages: Click the page you want to delete, and then click (Delete Page) on the Toolbar. Note • These buttons appear when two or more pages have been created. 8. Select Save As... in File menu. The Save dialog box appears. 9.
Page 243: Scanning Using Application Software (Scangear)
Scanning Using Application Software (ScanGear) What Is ScanGear (Scanner Driver)? Starting ScanGear (Scanner Driver) Scanning in Basic Mode ScanGear (Scanner Driver) Screens General Notes (Scanner Driver) Important • Available functions and settings vary depending on your scanner or printer.
Page 244: What Is Scangear (Scanner Driver)
What Is ScanGear (Scanner Driver)? ScanGear (scanner driver) is software required for scanning documents. Use the software to specify the output size, image corrections, and other settings. ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN interface.
Page 245 Advanced Mode Use the Advanced Mode tab to scan by specifying the color mode, output resolution, image brightness, color tone, and other settings.
Page 246: Starting Scangear (Scanner Driver)
Starting ScanGear (Scanner Driver) Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. Start ScanGear from IJ Scan Utility or other applications. Note • If you have more than one scanner or have a network compatible model and changed the connection from USB connection to network connection, set up the network environment.
Page 247: Scanning In Basic Mode
Scanning in Basic Mode Use the Basic Mode tab to scan easily by following these simple on-screen steps. To scan multiple documents at one time from the Platen, see Scanning Multiple Documents at One Time with ScanGear (Scanner Driver). When scanning from the ADF (Auto Document Feeder), preview is not available. Important •...
Page 248 Important • Some applications do not support continuous scanning from the ADF. For details, see the application's manual. Note • To scan magazines containing many color photos, select Magazine (Color). 3. Click Preview. Preview image appears in the Preview area. Important •...
Page 249 Note • Colors are adjusted based on the document type selected in Select Source. 4. Set Destination. Note • Skip ahead to Step 7 if an ADF option is selected in Select Source. 5. Set Output Size. Output size options vary with the selected Destination. 6.
Page 250: Scangear (Scanner Driver) Screens
ScanGear (Scanner Driver) Screens Basic Mode Tab Advanced Mode Tab...
Page 251: Basic Mode Tab
Basic Mode Tab Use the Basic Mode tab to scan easily by following these simple on-screen steps. This section describes the settings and functions available on the Basic Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note •...
Page 252 Document (Color) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in color. Document (Grayscale) ADF Duplex (only for models supporting ADF duplex scanning) Scan both sides of documents from the ADF in black and white. Important •...
Page 253 "OCR software" is software that converts text scanned as an image into text data that can be edited in word processors and other programs. Output Size Select an output size. Output size options vary by the item selected in Destination. Flexible Adjust the cropping frames (scan areas) freely.
Page 254 Deleting: Select the output size you want to delete in Output Size List, and then click Delete. Click Save to save the items listed in Output Size List. Important • Predefined output sizes such as A4 and 1024 x 768 pixels cannot be deleted. Note •...
Page 255 Correct gutter shadow Corrects shadows that appear between pages when scanning open booklets. Important • Be sure to see Gutter Shadow Correction for precautions and other information on using this function. Color Pattern... Adjust the image's overall color. Correct colors that have faded due to colorcast or other reasons and reproduce natural colors while previewing color changes.
Page 256 • The image returns to its original state when you preview again. (Rotate Right) Rotates the preview image 90 degrees clockwise. • The result will be reflected in the scanned image. • The image returns to its original state when you preview again. (Auto Crop) Displays and adjusts the cropping frame automatically to the size of the document displayed in the Preview area.
Page 257 When (Thumbnail) is displayed on Toolbar: Cropping frames are specified according to the document size, and thumbnails of scanned images appear. Only the images with the checkbox selected will be scanned. Note • When multiple images are previewed, different outlines indicate different selection status. Focus Frame (thick blue outline): The displayed settings will be applied.
Page 258 Note • Create cropping frame(s) on the displayed image. In thumbnail view, one cropping frame can be created per image. In whole image view, multiple cropping frames can be created. Adjusting Cropping Frames (ScanGear) Related Topic Scanning in Basic Mode...
Page 259: Advanced Mode Tab
Advanced Mode Tab This mode allows you to make advanced scan settings such as the color mode, output resolution, image brightness, and color tone. This section describes the settings and functions available on the Advanced Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Important...
Page 260 Enter Setting Name and click Add; the name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list and can be selected, along with the predefined items. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save the settings displayed in Favorite Settings List.
Page 261 Note • Zoom rescans the document and displays high-resolution image in Preview. • (Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the resolution of the displayed image will be low. Preview Performs a trial scan. Scan Starts scanning.
Page 262 In thumbnail view: In whole image view: (Thumbnail) / (Whole Image) Switches the view in the Preview area. (3) Preview Area (Clear) Deletes the preview image from the Preview area. It also resets the Toolbar and color adjustment settings. (Crop) Allows you to specify the scan area by dragging the mouse.
Page 263 (Uncheck All Frames) Available when two or more frames are displayed. Deselects the checkboxes of the images in thumbnail view. (Select All Frames) Available when two or more frames are displayed. Selects the images in thumbnail view and outlines them in blue. (Select All Cropping Frames) Available when two or more cropping frames are specified.
Page 264 Note • When multiple images are previewed, different outlines indicate different selection status. Focus Frame (thick blue outline): The displayed settings will be applied. Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously. To select multiple images, click them while pressing the Ctrl key.
Page 265: General Notes (Scanner Driver)
General Notes (Scanner Driver) ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it. Scanner Driver Restrictions • When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons.
Page 266 • When scanning Platen size images into Microsoft Office 2003 (Word, Excel, PowerPoint, etc.), click Custom Insert in the Insert Picture from Scanner or Camera screen. Otherwise, images may not be scanned correctly. • When scanning images into Microsoft Office 2007/Microsoft Office 2010 (Word, Excel, PowerPoint, etc.), use Microsoft Clip Organizer.
Page 267: Scanning Tips
Scanning Tips Positioning Originals (Scanning from Computer) Network Scan Settings IJ Network Scanner Selector EX2 Menu and Setting Screen...
Page 268: Positioning Originals (Scanning From Computer)
Positioning Originals (Scanning from Computer) This section describes how to load originals on the platen for scanning. If items are not placed correctly they may not be scanned correctly. Important • Be sure to observe the following when loading the original on the platen. Failure to observe the following may cause the scanner to malfunction or the platen glass to break.
Page 269 Important Important • Large items (such as A4 size photos) that cannot be • For the portions in which items cannot be scan- placed away from the edges/arrow (alignment mark) of ned, see Loading Originals. the platen may be saved as PDF files. To save in a for- mat other than PDF, scan by specifying the data format.
Page 270: Network Scan Settings
• If the icon is not displayed in the notification area on the desktop, follow the procedure below to start. Windows 10: From the Start menu, click (All apps >) Canon Utilities > IJ Network Scanner Selector EX2. Windows 8.1: Click IJ Network Scanner Selector EX2 on the Start screen.
Page 271 Windows 7: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX2 > IJ Network Scanner Selector EX2. The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3.
Page 272 Note • If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again. MP Drivers is installed Network settings of your scanner or printer is completed after installing the MP Drivers Network communication between your scanner or printer and computer is enabled If the problem is still not solved, see Network Communication...
Page 273: Frequently Asked Questions
Frequently Asked Questions Cannot Find Printer on Network Cannot Find Printer while Using Wi-Fi Network Key (Password) Unknown Network Cannot Print or Connect For other questions about network, click here. Printer Does Not Print Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Printout Results Are Unsatisfactory Print What to Do When Paper Is Jammed...
Page 274 Scan Results Are Unsatisfactory (macOS) Cannot Print/Scan from Smartphone/Tablet Cannot Set Correctly (Network) Cannot Find Printer During Setup Cannot Find Printer while Using Wi-Fi Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Forgot Administrator Password of Printer Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings Message Appears on Computer During Setup Checking Network Information...
Page 275: Network Settings And Common Problems
Network Settings and Common Problems Here are frequently asked questions on network. Select a connection method you are using, or you want to use. Wireless LAN Wireless Direct Wireless LAN Cannot Find Printer Cannot Find Printer while Using Wi-Fi Cannot Find Printer During Setup Cannot Proceed beyond Printer Connection Screen (Cannot Find Printer Connected via USB) Searching Printer by IP Address or Host Name During Setup Error Occurs During Wi-Fi Setup...
Page 276 Cannot Connect Smartphone/Tablet to Wireless Router Checking Wireless Router Network Name (SSID) for Smartphone/Tablet Setting Up Using Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet Downloading Canon PRINT Inkjet/SELPHY Problems while Using Printer Message Appears on Computer During Setup Printer Prints Slowly No Ink Level Appears in Printer Status Monitor (Windows)
Page 277: Network Communication Problems
Network Communication Problems Cannot Find Printer on Network Network Connection Problems Other Network Problems...
Page 278: Cannot Find Printer On Network
Cannot Find Printer on Network Cannot Find Printer During Setup While using printer: Cannot Find Printer while Using Wi-Fi...
Page 279: Cannot Find Printer During Setup
Cannot Find Printer During Setup If you cannot find the printer on network during setup, check the following. When you complete all the checking, try to set up from the beginning. When connecting the printer to Wi-Fi, check/respond to all the items in [Step 1], and try to set up from the beginning.
Page 280 2. Check if the printer is turned on If printer is not turned on, turn on the power. If the printer is on, turn them off and on again. Proceed once you complete checking the power status above. 2. Check PC network connection Can you view any web pages on your computer? Make sure the computer and network device (wireless router, etc.) are configured and the computer is connected to the network.
Page 281 Solve the Problem, Using IJ Network Device Setup Utility Step 2 Diagnose and repair the network connections using IJ Network Device Setup Utility. Download IJ Network Device Setup Utility from the below page, and install it on your computer. Checking Printer Connection Status Using IJ Network Device Setup Utility Refer to below in regard to starting up IJ Network Device Setup Utility.
Page 282: Cannot Proceed Beyond Printer Connection Screen (Cannot Find Printer Connected Via Usb)
Cannot Proceed beyond Printer Connection Screen (Cannot Find Printer Connected via USB) If you cannot proceed beyond the Printer Connection screen, check the following. Make sure USB cable is securely plugged in to printer and computer. Check1 Connect the printer and the computer using a USB cable as the illustration below. The USB port is located at the back of the printer.
Page 283 2. Turn off printer. 3. Shut down computer. After shutting down, restart your computer and install the latest MP Drivers downloaded in step 1.
Page 284: Cannot Find Printer While Using Wi-Fi
Cannot Find Printer while Using Wi-Fi First, make sure printer is turned on. Next, make sure that you can view any web page on the Internet with your computer. After confirming the two, use the IJ Network Device Setup Utility to diagnose and repair network status.
Page 285 Make sure security software's firewall is off. Check7 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 286: Network Connection Problems
Network Connection Problems Printer Suddenly Stopped Working for Some Reason Network Key (Password) Unknown Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings...
Page 287: Printer Suddenly Stopped Working For Some Reason
Printer Suddenly Stopped Working for Some Reason First, make sure printer is turned on. Next, make sure that you can view any web page on the Internet with your computer. After confirming the two, use the IJ Network Device Setup Utility to diagnose and repair network status.
Page 288 Is the printer connected to the wireless router? Check2 Use the icon on the LCD to check the connection status between the printer and wireless router. If the icon is not displayed, Wi-Fi is disabled. Turn on wireless communication on the printer. Make sure the printer and wireless router network settings match.
Page 289 Make sure security software's firewall is off. Check8 If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network. If this warning message appears, set security software to always allow access.
Page 290 Printing Network Settings Make sure the printer is not placed too far away from the device. Check5 If the distance between the printer and device is too far, wireless communication becomes poor. Place the printer and device close to each other. Make sure 5 devices are already connected.
Page 291: Network Key (Password) Unknown
Network Key (Password) Unknown Use the IJ Network Device Setup Utility to diagnose and repair network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 292 Either TKIP (basic encryption) or AES (secure encryption) is selected automatically as the dynamic encryption method. For details, see If WPA/WPA2 Details Screen Appears. Note • This printer supports WPA/WPA2-PSK (WPA/WPA2-Personal) and WPA2-PSK (WPA2- Personal). • Using WEP The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 293: Printer Cannot Be Used After Replacing Wireless Router Or Changed Router Settings
Printer Cannot Be Used After Replacing Wireless Router or Changed Router Settings When you replace a wireless router, redo the network setup for the printer according to the replaced one. Click here and perform setup. Note • IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it.
Page 294 If using WPA/WPA2 key or a password, make sure encryption key for Check3 computer, network device, and printer matches key set for wireless router. The length or format of the Wi-Fi password and authentication method must be identical among the wireless router, the printer, and your computer.
Page 295: Other Network Problems
Other Network Problems Checking Network Information Restoring to Factory Defaults...
Page 296: Checking Network Information
Printing Network Settings For Windows, you can check the network setting information on the computer screen. Canon IJ Network Device Setup Utility Screen Checking Computer IP Address or MAC Address To check the IP Address or MAC address of your computer, follow the instructions below.
Page 297 Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1. Select Command Prompt from Start. 2. Type the ping command and press Enter. The ping command is as follows: ping XXX.XXX.XXX.XXX "XXX.XXX.XXX.XXX"...
Page 298 If "100% packet loss" appears, communication is not taking place. Otherwise, computer is communicating with target device. Checking Network Setting Information To check the printer's network settings information, print out the network setting information of the printer. Printing Network Settings...
Page 299: Restoring To Factory Defaults
Restoring to Factory Defaults Important • Initialization erases all network settings on the printer, making printing/scanning operation from a computer over a network impossible. To use the printer over a network again after restoring it to the factory defaults, Click here and redo setup. Press the Setup button until "10"...
Page 300: Problems While Printing/Scanning From Smartphone/Tablet
Problems while Printing/Scanning from Smartphone/Tablet Cannot Print/Scan from Smartphone/Tablet...
Page 301: Cannot Print/Scan From Smartphone/Tablet
Cannot Print/Scan from Smartphone/Tablet If you cannot print/scan from your smartphone/tablet, it is possible that your smartphone/tablet cannot communicate with the printer. Check the cause of your problem according to the connection method. Cannot Communicate with Printer over Wireless LAN Cannot Communicate with Printer while It Is in Wireless Direct Note •...
Page 302 Printing Network Settings Note • If you have a computer, IJ Network Device Setup Utility allows you to diagnose and repair the network status. Select the link below to download IJ Network Device Setup Utility and install it. Checking Printer Connection Status Using IJ Network Device Setup Utility See below for starting up IJ Network Device Setup Utility.
Page 303 If your smartphone/tablet cannot communicate with the printer in the Wireless Direct, check the following. Check the power status of printer and other devices (smartphone or tablet). Check1 Turn on the printer or devices. If the power is already turned on, cycle the power switch. Is Wireless Direct enabled? Check2 Make sure the...
Page 304: Printing Problems
Printing Problems Printer Does Not Print Ink Does Not Come Out Printer Does Not Pick up or Feed the Paper/"No Paper" Error Printout Results Are Unsatisfactory...
Page 305: Printer Does Not Print
Printer Does Not Print Make sure printer is turned on. Check1 If not, make sure the printer is securely plugged in and press ON button to turn on. Note • If you are printing large data such as photos or other graphics, printing may take longer to start. Wait until printing starts.
Page 306 The printer will not print properly if you are using a printer driver for a different printer. • For Windows: Make sure "Canon XXX series" (where "XXX" is your printer's name) is selected in the Print dialog box. Note • If multiple printers are registered to your computer, set your printer as default printer to make the one selected by default.
Page 307: Ink Does Not Come Out
Ink Does Not Come Out Check the estimated ink levels in the FINE cartridges. When a FINE cartridge Check1 runs out of ink, replace it with new ones. Checking the Ink Status with the Ink Lamps on the Operation Panel Replacing a FINE Cartridge Is the FINE cartridge installed properly? Check2...
Page 308 • For Windows: Clean the print head • For macOS: Clean the print head If it does not improve, go to the next step. Clean the print head again. Step3 After cleaning the print head again, print the nozzle check pattern and check the result. If it still does not improve, go to the next step.
Page 309: Printer Does Not Pick Up Or Feed The Paper/"No Paper" Error
Printer Does Not Pick up or Feed the Paper/"No Paper" Error Make sure paper is loaded. Check1 Loading Paper When loading paper, consider the following. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading the paper. •...
Page 310 Clean paper feed roller. Check6 Cleaning Paper Feed Rollers If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 311: Printout Results Are Unsatisfactory
• Printing from a PictBridge (Wi-Fi) compliant device: Check the settings on your PictBridge (Wi-Fi) compliant device. PictBridge (Wi-Fi) Print Settings • Printing from your smartphone/tablet using Canon PRINT Inkjet/SELPHY: Check the settings on Canon PRINT Inkjet/SELPHY. Print Photos from Your Smartphone Make sure appropriate print quality is selected (see list above).
Page 312 See also the sections below: Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/Streaks or Lines Colors Are Unclear Lines Are Misaligned/Distorted Paper Is Smudged / Printed Surface Is Scratched Vertical Line Next to Image Cannot Complete Printing Lines Incomplete or Missing (Windows) Images Incomplete or Missing (Windows) Ink Blots / Paper Curl Back of Paper Is Smudged...
Page 313: Printouts Are Blank/Blurry Or Fuzzy/Inaccurate Or Bleeding Colors/Streaks Or Lines
Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/ Streaks or Lines Printing Is Blurry Colors Are Wrong...
Page 314 White Streaks Appear Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check the estimated ink levels in the FINE cartridges. When a FINE cartridge Check2 runs out of ink, replace it with new ones. Checking the Ink Status with the Ink Lamps on the Operation Panel Replacing a FINE Cartridge Is the FINE cartridge installed properly? Check3...
Page 315 Print the nozzle check pattern. Step1 After printing the nozzle check pattern, examine the pattern. • For Windows: Printing a Nozzle Check Pattern • For macOS: Printing a Nozzle Check Pattern If the pattern is not printed correctly, go to the next step. Clean the print head.
Page 316 • When copying, see also the sections below: Is platen glass dirty? Check6 Clean the platen glass. Cleaning Platen and Document Cover Make sure original is properly loaded on platen. Check7 When you load the original on the platen, load it with the side to be copied facing down. Loading Originals Is copy source a printed paper by printer? Check8...
Page 317: Colors Are Unclear
Colors Are Unclear Is nozzle check pattern printed properly? Check1 Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. Print the nozzle check pattern. Step1 After printing the nozzle check pattern, examine the pattern. •...
Page 318 Replacing a FINE Cartridge For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing Is Faint or Uneven. Check the estimated ink levels in the FINE cartridges. When a FINE cartridge Check2 runs out of ink, replace it with new ones.
Page 319: Lines Are Misaligned/Distorted
Lines Are Misaligned/Distorted Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Perform print head alignment. Check2 If printed lines are misaligned/distorted or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 320: Paper Is Smudged / Printed Surface Is Scratched
Paper Is Smudged / Printed Surface Is Scratched Paper Is Smudged Smudged Edges Smudged Surface Printed Surface Is Scratched Check paper and print quality settings. Check1 Printout Results Are Unsatisfactory Check paper type. Check2 Make sure you are using the right paper for what you are printing. Supported Media Types Correct curl before loading paper.
Page 321 1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 in.
Page 322 1. Check that printer is turned on. 2. Open Canon IJ Printer Assistant Tool. Opening the Maintenance Tool (Canon IJ Printer Assistant Tool) 3. Select Custom Settings. 4. Drag Ink Drying Wait Time slide bar to set the wait time and select OK.
Page 323: Vertical Line Next To Image
Vertical Line Next to Image Is loaded paper size correct? Check If the loaded paper is larger than the size you specified, a vertical line (A) may appear in the margin. Set the paper size to match the loaded paper. Printout Results Are Unsatisfactory Note •...
Page 324: Scanning Problems (Windows)
Scanning Problems (Windows) Scanning Problems...
Page 325: Scanning Problems
Scanning Problems Scanner Does Not Work ScanGear (Scanner Driver) Does Not Start...
Page 326: Scanner Does Not Work
Scanner Does Not Work Make sure that your scanner or printer is turned on. Check 1 Connect the USB cable to a different USB port on the computer. Check 2 If the USB cable is connected to a USB hub, remove it from the USB hub and Check 3 connect it to a USB port on the computer.
Page 327: Scangear (Scanner Driver) Does Not Start
ScanGear (Scanner Driver) Does Not Start Make sure MP Drivers is installed. Check 1 If not installed, install MP Drivers from the Setup CD-ROM or our website. Select your scanner or printer on the application's menu. Check 2 Important • If your scanner or printer name is displayed multiple times, select the one that does not include WIA. Note •...
Page 328: Mechanical Problems
Mechanical Problems Printer Does Not Turn On Printer Turns Off Unexpectedly or Repeatedly USB Connection Problems Cannot Communicate with Printer via USB...
Page 329: Printer Does Not Turn On
Make sure power plug is securely connected to printer, and then turn on again. Check2 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn Check3 on again. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 330: Printer Turns Off Unexpectedly Or Repeatedly
The setting to shut off the power automatically is disabled. • To disable the setting from the computer: For Windows, use Canon IJ Printer Assistant Tool or ScanGear (scanner driver) to disable the setting. Follow the procedure below to disable the setting using Canon IJ Printer Assistant Tool.
Page 331: Usb Connection Problems
USB Connection Problems Make sure of the checking item below when you find one of the followings. • Printing/Scanning is slow. • Hi-Speed USB connection does not work. • A message such as "This device can perform faster" appears. (Windows) Note •...
Page 332: Cannot Communicate With Printer Via Usb
Cannot Communicate with Printer via USB Make sure printer is turned on. Check1 Connect USB cable properly. Check2 As the illustration below, the USB port is at the back of the printer. Important • Check the orientation of the "Type-B" connector and connect to the printer. For details, refer to the instruction manual supplied with the USB cable.
Page 333: Installation And Download Problems
Installation and Download Problems Failed to MP Drivers Installation (Windows) Updating MP Drivers in Network Environment (Windows)
Page 334: Failed To Mp Drivers Installation (Windows)
For Windows 8.1 / Windows 7: Select Control Panel > Programs and Features. 2. Check if there is "Canon XXX series MP Drivers" you want to install in list. "XXX" is the model name. 3. If you find MP Drivers for printer you want to install, uninstall it.
Page 335: Updating Mp Drivers In Network Environment (Windows)
Download the latest MP Drivers in advance. Download the latest MP Drivers for your model on the download page of the Canon website. After the download is completed, overwrite and install the new version of the MP Drivers according to the specified installation procedure.
Page 336: Errors And Messages
Errors and Messages When Error Occurred Message (Support Code) Appears...
Page 337: When Error Occurred
When Error Occurred If an error occurs in printing, for example, if the paper runs out or jams, a troubleshooting message appears on the computer screen. For some errors, a support code (error number) is also displayed. On the printer's LCD, an error code is displayed. When a Support Code and a Message are displayed on the Computer Screen (Windows): Take the appropriate action described in the message.
Page 338 Check the error code on the printer's LCD and take the corresponding action described below. Error Support Cause Action Code Code 1000 Printer is out of paper. • If the printer is out of paper: 3442 Printing of the first side is complete when do- 1000 ing manual duplex printing.
Page 339 1700 Ink absorber is almost full. 1700 1701 1701 1712 1712 1713 1713 1714 1715 1714 1715 1890 Shipping tape or protective material may still 1890 be attached to FINE cartridge holder. 4103 Cannot perform printing with current print set- 4103 tings.
Page 340 Turn off the wireless router and turn it back on, and then perform setup again. If the above does not resolve the problem, re- fer to the instruction manual supplied with the wireless router and check the settings. – Cannot connect to a wireless router. Press the printer's OK button to resolve the er- ror.
Page 341 – Only information registered to the printer is de- Press the printer's OK button to resolve the er- leted because of failing to connect IJ Cloud ror. Printing Center. Delete registered information of IJ Cloud Print- ing Center from your computer or smartphone. –...
Page 342 Turn off the printer and unplug it. 5012 Plug in the printer again and turn it back on. 5050 If this does not solve the problem, contact your nearest Canon service center to request a re- 5200 pair. 5205 5206...
Page 343 6D01 7500 An error requiring a repair has occurred. Turn off the printer and unplug it. 7600 Contact your nearest Canon service center to request a repair. 7700 7800 B20B...
Page 344: Message (Support Code) Appears
Message (Support Code) Appears This section describes some of the messages that may appear on the computer screen. Note • A support code (error number) is displayed on the computer for some errors. For details on errors that have support code, see List of Support Code for Error.
Page 345 Note • If the User Account Control screen appears, select Continue. 2. Open USB Printing Support Properties. Double-click Universal Serial Bus controllers and USB Printing Support. Note • If the USB Printing Support Properties screen does not appear, make sure the printer is correctly connected to the computer.
Page 346: List Of Support Code For Error
List of Support Code for Error Support code appears on your computer screen when errors occur. A "support code" is an error number, and appears along with an error message. When an error occurs, check the support code and take the appropriate action in response. Support Code Appears on Computer Screen •...
Page 347 • 7000 to 7ZZZ 7500 7600 7700 7800 • A000 to ZZZZ B20B Note • For information on how to deal with paper jams, see What to Do When Paper Is Jammed.
Page 348: What To Do When Paper Is Jammed
What to Do When Paper Is Jammed If paper jams, remove it following the appropriate procedure as shown below. • If you can see the jammed paper at the paper output slot or the rear tray: 1300 • If you cannot see the jammed paper at the paper output slot or the rear tray: Paper Is Jammed inside Printer •...
Page 349 1300 Cause Paper is jammed when feeding paper from rear tray. What to Do Remove the jammed paper following the instructions below. 1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier. Hold the paper with both hands, and pull it out slowly so as not to tear it. Note •...
Page 350 If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 351: Paper Is Jammed Inside Printer
Paper Is Jammed inside Printer If the jammed paper tears and you cannot remove the paper either from the paper output slot or the feed slot, or if the jammed paper remains inside the printer, remove the paper following the instructions below. Note •...
Page 352 When moving the FINE cartridge holder, hold the FINE cartridge holder and slide it slowly to the far right or left. 4. Hold jammed paper firmly in both hands. If the paper is rolled up, pull out it. 5. Slowly pull out paper, so as not to tear it.
Page 353 Check the printer again for any remaining bits of paper. If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 354 1000 Cause Possible causes include the following. • There is no paper in the rear tray. • Paper is not loaded in the rear tray properly. What to Do Take the corresponding actions below. • Load paper in the rear tray. Loading Plain Paper / Photo Paper •...
Page 355 Press the printer's OK button to cancel the error. Note • If you are printing a print head alignment sheet during printer setup, do not cancel printing.
Page 356 1200 Cause Cover is open. What to Do Close the cover and wait for a while. Do not forget to close it, such as after replacing FINE cartridges.
Page 357 1203 Cause Cover is opened during printing. What to Do If paper remains inside the printer, slowly pull out the paper with both hands and close the cover. Press the printer's OK button to resolve the error. The printer ejects one blank sheet of paper and resumes printing from the next paper. The printer will not reprint the page that was printed when the cover is opened.
Page 358 FINE cartridge is not installed. What to Do Install the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact your nearest Canon service center to request a repair. Note • To cancel printing, press the printer's Stop button.
Page 359 If the error is not resolved, the FINE cartridge may be damaged. Replace the FINE cartridge with a new one. Replacing a FINE Cartridge If the measures above do not solve the problem, contact your nearest Canon service center to request a repair.
Page 360 1485 Cause Appropriate ink cartridge is not installed. What to Do Printing cannot be executed because the ink cartridge is not compatible with this printer. Install the appropriate ink cartridge. If you want to cancel printing, press the printer's Stop button.
Page 361 1682 Cause FINE cartridge cannot be recognized. What to Do Replace the FINE cartridge. Replacing a FINE Cartridge If the error is not resolved, the FINE cartridge may be damaged. Contact your nearest Canon service center to request a repair.
Page 362 Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. Please be advised that Canon shall not be liable for any malfunction or trouble caused by using a non- genuine Canon ink cartridge or by using non-genuine Canon ink.
Page 363 1688 Cause The ink has run out. What to Do Replace the ink cartridge and close the cover. If printing is in progress and you want to continue printing, press the printer's Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled.
Page 364: Fine Cartridge Is Not Installed (168A)
FINE Cartridge is Not Installed (168A) Cause Possible causes include the following. • FINE cartridge is not installed or may not be installed properly. • FINE cartridge incompatible with this printer is installed. What to Do If FINE cartridges are not installed, install the appropriate FINE cartridges properly. Note •...
Page 365 Cause Ink absorber is almost full. What to Do Press the printer's OK button to continue printing. Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
Page 366: Shipping Tape Etc. Are Still Attached (1890)
Shipping Tape etc. Are Still Attached (1890) Cause Shipping tape or protective material may still be attached to FINE cartridge holder. What to Do Store the output tray extension and the paper output tray, open the cover, and make sure that shipping tape and protective material have been removed from the FINE cartridge holder.
Page 367 2114 Cause Paper size settings at printer driver do not match the paper size registered in the printer. What to Do Press the printer's Stop button to cancel printing. Match the paper loaded in the rear tray with the paper size registered on the printer using the printer's Paper Select button.
Page 368 2900 Cause Scanning print head alignment sheet failed. What to Do Press the printer's OK button to cancel the error and take the corresponding actions below. • Make sure the print head alignment sheet is set in the correct position and orientation on the platen. •...
Page 369 2901 Cause Print head alignment pattern has been printed and printer is waiting to scan sheet. What to Do Scan the printed alignment pattern. 1. Load print head alignment sheet on platen. Place the printed side down and align the mark in the upper left corner of the sheet with the alignment mark 2.
Page 370 4102 Cause Media type and paper size are not set correctly. What to Do Press the printer's Stop button to cancel printing, change the media type or paper size setting, and then retry printing. Note • When setting Custom Paper Size for media other than plain paper, set the Width to 127.0 mm (5.00 in.) or less.
Page 371 4103 Cause Cannot perform printing with current print settings. What to Do Press the printer's Stop button to cancel printing. Change the print settings specified when printing and retry printing.
Page 372 Printer error has occurred. What to Do Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 373 Printer error has occurred. What to Do Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 374 • Make sure the FINE cartridges are properly installed. Push up the ink cartridge lock lever until it clicks. Turn the printer back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 375 What to Do Turn off the printer and unplug it. After a while, plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.
Page 376 5B00 Cause Printer error has occurred. What to Do Contact your nearest Canon service center to request a repair. Note • In the case of warnings or errors caused by remaining ink levels, the printer cannot print or scan.
Page 377 What to Do When Paper Is Jammed Turn off the printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, contact your nearest Canon service center to request a repair.

This manual is also suitable for:

Pixma ts3400 series Pixma ts3440

Canon PIXMA TS3450 Online Manual

Quick Links

Related Manuals for Canon PIXMA TS3450

Summary of Contents for Canon PIXMA TS3450