Show Dev Log File; Show Erase Status; Show Image Version; Show Logout - Avaya X330WAN User Manual

show dev log file

Use the
show dev log file
Syntax
show dev log file

show erase status

Use the show erase status command to view the status of the Erase Startup
Configuration operation.
Syntax
show erase status

show image version

Use the
image on both memory banks of the device.
Syntax
show image version
Example
X330WAN-2DS1-1(super)# show image version
Bank Version
---- -------
A
B
Module number: 1

show logout

Use the
show logout
Syntax
show logout
Example
X330WAN-2DS1-1(configure)# show logout
CLI timeout is 15 minutes
Avaya X330WAN User's Guide
command to display the encrypted device's log file.
show image version
3.9.7
3.12.10
command to display the CLI logout.
command to display the software version of the
General: Device Commands
105