Show Ip Access-List-Dscp; Show Ip Access-Lists - Avaya X330WAN User Manual

Parameters
interface name
directions
Example
X330WAN-2DS1-1(configure)# show ip access-group "FastEthernet 1" in
Note: This command is available only when not in any context.

show ip access-list-dscp

Use the
show ip access-list-dscp
Policy list.
Syntax
show ip access-list dscp <policy-list-number> [<dscp>]
Parameters
policy-list-number
dscp
Example
X330WAN-2DS1-1(configure)# show ip access-list-dscp 101 63

show ip access-lists

Use the
Syntax
show ip access-lists[<policy-list-number>]
Parameters
policy-list-number
Example
X330WAN-2DS1-1(configure)# show ip access-lists
ip access-list 100 10 deny-and-notify tcp
Avaya X330WAN User's Guide
The name of the interface, a string (e.g., "FastEthernet 0").
in | out
The Policy list number, an integer from 100 to 149, where
0 is the default list.
DSCP entry, an integer from 0 to 63.
show ip access-lists
The Policy list number, an integer from 100 to 149, where
0 is the default list.
command to display the DSCP table of a given
command to see all the current Policy lists.
Policy CLI Commands
219