Default-Metric (Router-Ospf Context); Default-Metric (Router-Rip Mode); Distribution-List (Router-Rip Mode) - Avaya X330WAN User Manual

default-metric (Router-OSPF context)

Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 20.
Syntax
[no] default-metric <default metric>
Parameters
default metric
Example
X330WAN-2DS1-1(configure router:ospf)# default-metric 50

default-metric (Router-RIP Mode)

Use the default-metric command to set the default metric of redistributed
routes. The no form of this command restores the default. The default metric is 1.
Syntax
[no] default-metric <default metric>
Parameters
default metric
Example
X330WAN-2DS1-1(configure router:rip)# default-metric 5

distribution-list (Router-RIP Mode)

Use the distribution-list command to filter incoming/outgoing networks in
route updates. The
Syntax
[no] distribution-list <access-list-number> <type> [<interface-
type><interface-number>|<protocol>]
Avaya X330WAN User's Guide
An integer from 1 to 65535.
The interface RIP route metric value. The range is 1 to 16.
form of this command deactivates the filter.
no
Layer 3 CLI Commands
167