Ip Distribution Access-List-Owner; Ip Icmp-Errors; Ip Max-Arp-Entries - Avaya X330WAN User Manual

Chapter 6 X330WAN CLI Commands

ip distribution access-list-owner

Use the
ip distribution access-list-owner
owner.
Syntax
ip distribution access-list-owner <policy-list-number> <owner>
Parameters
policy-list-number
owner
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., "New York").
Example
X330WAN-2DS1-1(configure)# ip distribution access-list-owner 78
"admin"

ip icmp-errors

Use the
ip icmp-errors
of this command sets ICMP error messages OFF.
Syntax
[no] ip icmp-errors

ip max-arp-entries

Use the ip max-arp-entries command to specify the maximum number of
ARP cache entries allowed in the ARP cache. The no form of this command restores
to the default value of 4096. This command takes effect only after start-up.
Syntax
[no] ip max-arp-entries <value>
176
An integer from 1 to 99.
List owner.
command to set ICMP error messages ON. The
command to set the Policy list
Avaya X330WAN User's Guide
form
no