Speed (Fastethernet Interface Context); Fabricfast Ethernet Interface Cli Commands; Interface Fabricfastethernet - Avaya X330WAN User Manual

Chapter 6 X330WAN CLI Commands

speed (FastEthernet interface context)

Use the
speed
Note: This command is executed from the Fast Ethernet interface.
Note: This command functions only in
Syntax
speed {10MB|100MB}
Parameters
10MB
100MB
Example
X330WAN-2DS1-1(config-if:FastEthernet1)# speed 100MB

FabricFast Ethernet Interface CLI Commands

This section contains a list of all FabricFast Ethernet interface related CLI
commands.

interface FabricFastEthernet

Use the
interface FabricFastEthernet
create the interface. The
interface or an IP interface.
Syntax
[no] interface FabricFastEthernet [port[:vlan[.ip-interface]]]
Parameters
port
vlan
114
command to control the speed setting for the interface.
Sets a speed of 10 Mbps.
Sets a speed of 100 Mbps.
interface FabricFastEthernet
form of this command deletes a FabricFastEthernet
no
An integer with a value of 1.
The 802.1q Fabric number, an integer from 1 to 3071.
mode.
no autoneg
command to create and/or enter
context. For LAN interfaces, use this command to
Avaya X330WAN User's Guide