Mtu (Serial Interface Context); Nrzi-Encoding (X330Wan-2Usp Serial Interface Context); Queue-Limit (Serial Interface Context) - Avaya X330WAN User Manual

mtu (Serial interface context)

Use the
mtu
form of this command restores interface MTU to the default value (1500).
no
Syntax
[no] mtu <size in bytes>
Parameters
size in bytes
Example
X330WAN-2DS1-1(config-if:Serial1:1)# mtu 1000

nrzi-encoding (X330WAN-2USP Serial interface context)

Use the
nrzi-encoding
(NRZI-space) line-coding format on the interface. The
disables NRZ encoding (default).
Syntax
[no] nrzi-encoding
Example
X330W-2USP-1(super-if:Serial2)# nrzi-encoding

queue-limit (Serial interface context)

Use the
queue-limit
Syntax
[no] queue-limit <queue id> <size>
Parameters
queue id
size
Example
X330WAN-2DS1-1(config-if:Serial1:1)# queue-limit 1 200
Avaya X330WAN User's Guide
command to set the interface Maximum Transmission Unit (MTU). The
An integer from 64 to 1500.
command to enable the non-return-to-zero inverted
command to set the packet size of the various queues.
The queue priority ID (1 - highest, 4 - lowest).
The size of the queue, in packets. The total number of packets in all
queues can not exceed 5000.
Interface Serial CLI Commands
form of this command
no
135