Controller - Avaya X330WAN User Manual

Parameters
line
internal
Note: Only one E1/T1 controller at a time can recover the network clock and
distribute it to the internal clock generator.
Example
X330WAN-2DS1-1(config-controller:1)#
X330WAN-2DS1-1(config-controller:1)#

controller

Use the
Note: You can not configure one controller as E1 and the other as T1.
Syntax
controller { e1 | t1 } <port>
Parameters
e1
t1
port
Example
X330WAN-2DS1-1(configure)# controller E1 2
Avaya X330WAN User's Guide
The controller recovers the external clock from the line and provides
the recovered clock to the internal (system) clock generator. This is
the default value.
The controller synchronizes itself to the internal (system) clock.
command to enter the specified controller's mode.
controller
An E1 port.
A T1 port.
The number of the port that is being configured.
Controller CLI Commands (X330WAN-2DS1 Only)
clock source internal
no clock source
119