Ip Vrrp Address; Ip Vrrp Auth-Key - Avaya X330WAN User Manual

Chapter 6 X330WAN CLI Commands

ip vrrp address

Use the ip vrrp address command to assign an IP address to the virtual
router. The no form of this command removes an IP address from a virtual router.
Note: This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp <vr-id> address <ip-address>
Parameters
vr-id
ip-address
Example
To assign address 10.0.1.2 to virtual router 1:
X330WAN-2DS1-1(configure)# ip vrrp 1 address 10.0.1.2

ip vrrp auth-key

Use the ip vrrp auth-key command to set the virtual router simple password
authentication for the virtual router ID. The no form of this command disables
simple password authentication for the virtual router instance.
Note: This command is executed from the Fast Ethernet and FabricFastEthernet
interfaces.
Syntax
[no] ip vrrp <vr-id> auth-key <key-string>
Parameters
vr-id
key-string
Example
ip vrrp 1 primary 192.168.66.23
188
Virtual Router ID, an integer from 1 to 255.
The IP address to be assigned to the virtual router.
Virtual Router ID, an integer from 1 to 255.
Simple password string.
Avaya X330WAN User's Guide