Chapter 6
X330WAN CLI Commands
show banner post-login
Use the
Syntax
show banner post-login
Example
X330WAN-2USP-1(super)# show banner post-login
show boot bank
Use the
show boot bank
device boots at the next boot process.
Syntax
show boot bank
Example
X330WAN-2DS1-1(super)# show boot bank
Boot bank set to bank-a
show copy status
Use the show copy status command to show the status of the local
configuration copy operation.
Syntax
show copy status
Example
X330WAN-2DS1-1(super)# show copy status
Module #1
===========
Module
Source file
Destination file : running-config
Host
Running state
Failure display
Last warning
104
show banner post-login
command to display the software bank from which the
: 1
: startup-config
: -
: Idle
: (null)
: No warning
command to display the post-login banner.
Avaya X330WAN User's Guide