OSPF Routing Protocol
Configuring interface bundle Dallas
SR/configure> interface bundle Dallas
SR/configure/interface/bundle Dallas> link t1 1
SR/configure/interface/bundle Dallas> encapsulation ppp
SR/configure/interface/bundle Dallas> ip address
20.20.20.1 24
SR/configure/interface/bundle Dallas> exit
Configuring ospf
SR/configure> router routerid 10.10.10.1
SR/configure> router ospf
SR/configure/router/ospf> area 760
SR/configure/router/ospf/area 760> exit
Configuring ospf interface parameters
SR/configure/router/ospf> interface Dallas area_id 760
SR/configure/router/ospf/interface Dallas> exit
SR/configure/router/ospf> interface ethernet0 area_id
760
SR/configure/router/ospf/interface ethernet0> exit 3
Displaying neighbors
Note that "display" and "show" can be used interchangeably in the CLI tree hierarchy.
Execute show ip ospf neighbor list on the SR1001 to display the neighbor
information. In this example, the state is in FULL adjacency with the router.
Figure 32: show ip ospf neighbor list Command
210
Avaya Secure Router 1000 Series Configuration Guide
December 2010