Show Frame-Relay Lmi - Avaya X330WAN User Manual

Chapter 6 X330WAN CLI Commands

show frame-relay lmi

Use the
show frame-relay lmi
statistics.
Syntax
show frame-relay lmi [interface <interface name>]
Parameters
interface name
Example
X330WAN-2USP-1(super)# show frame-relay lmi
LMI Statistics for interface Serial 1 (Frame Relay DTE)
LMI TYPE = Auto Detect Mode
Invalid Unnumbered info
Invalid dummy Call Ref
Invalid Status Message
Invalid Information ID
Invalid Report Request
Num Status Enq. Sent
Num Update Status Rcvd
The following is a description of the show frame-relay lmi output fields:
Field
LMI TYPE
Invalid
Unnumbered info
Invalid Prot
Disc
Invalid dummy
Call Ref
Invalid Msg
Type
Invalid Status
Message
148
command to display the Frame Relay LMI
The name of the interface whose statistics are to be displayed.
0,
0,
0,
0,
0,
0,
0,
Description
The signalling or LMI specification:
, or
ITU-T Auto Detect
The number of LMI messages received with invalid,
unnumbered information fields.
The number of LMI messages received with invalid protocol
discriminators.
The number of LMI messages received with invalid dummy call
references.
The number of LMI messages received with invalid message
types.
The number of LMI messages received with invalid status
messages.
Invalid Prot Disc
Invalid Msg Type
Invalid Lock Shift
Invalid Report IE Len
Invalid Keep IE Len
Num Status msgs Rcvd
Num Status Timeouts
detected ANSI
mode.
Avaya X330WAN User's Guide
0
0
0
0
0
0
0
,
detected