Frame-Relay Lmi-N392Dte (Serial Interface Context); Frame-Relay Lmi-N393Dte (Serial Interface Context); Frame-Relay Priority-Dlci-Group (Serial Sub-Interface Context) - Avaya X330WAN User Manual

frame-relay lmi-n392dte (Serial interface context)

Use the
form of this command sets the error threshold to the default value (3).
no
Syntax
[no] frame-relay lmi-n392dte <threshold>
Parameters
threshold
Example
X330W-2USP-1(super-if:Serial2)# frame-relay lmi-n392dte 6

frame-relay lmi-n393dte (Serial interface context)

Use the
The form of this command sets the monitored event count to the default value
no
(4).
Syntax
[no] frame-relay lmi-n393dte <events>
Parameters
events
Note: Set the value for this counter greater than the
Example
X330W-2USP-1(super-if:Serial2)# frame-relay lmi-n393dte 8

frame-relay priority-dlci-group (Serial sub-interface context)

Use the
frame-relay priority-dlci-group
of DLCIs on a sub-interface. The
of DLCIs on the sub-interface.
Syntax
[no] frame-relay priority-dlci-group <DLCI1> [<DLCI2> [<DLCI3>
[<DLCI4>]]]
Avaya X330WAN User's Guide
frame-relay lmi-n392dte
The error threshold value, an integer from 1 to 10.
frame-relay lmi-n393dte
The monitored error count value, an integer from 1 to 10.
Frame Relay Configuration CLI Commands
command to set the LMI error threshold. The
command to set the monitored event count.
lmi-n392dte
command to define a priority group
form of this command deletes the priority group
no
value.
145