Chapter 3
Initial Configuration
Saving Your Configuration
To save your configuration, type
copies your X330WAN configuration from the current VRAM Running
Configuration to the Startup Configuration NVRAM.
Note: Unsaved configurations are lost after each reset or after a power failure.
X330WAN Default Settings
The default settings for the X330WAN and its ports are determined by its firmware.
These default settings are subject to change. Newer versions of the software for the
X330WAN can be downloaded from the Avaya Network Software Download Web
site at http://www.avaya.com/support.
Table 3.3 provides the X330W-2DS1 default settings.
Table 3.3
Function
Port Speed (Fast Ethernet)
Port Duplex (Fast Ethernet)
Auto-Negotiation (Fast Ethernet)
WAN mode (WAN)
Framing (WAN)
Linecode (WAN)
Clock Source (WAN)
Cable Length (for T1)
Speed (for T1)
SNMP Community
Avaya X330WAN CLI Entry Login
28
copy running-config startup-config
X330W-2DS1 Default Settings
Default Setting
100 Mbps
Full Duplex
Enabled
T1
SF for T1, CRC4 for E1
AMI for T1, HDB3 for E1
line
long, gain26, 0db
56
public
Login name:
, Password:
root
Avaya X330WAN User's Guide
. This
root