Ip Redirects (Interface Context); Ip Rip Authentication Key (Interface Context) - Avaya X330WAN User Manual

Chapter 6 X330WAN CLI Commands
Syntax
[no] ip proxy-arp
Example
X330WAN-2DS1-1(configure)# no ip proxy-arp

ip redirects (Interface context)

Use the ip redirects command to enable the sending of redirect messages on
the interface. The no form of this command disables the redirect messages. By
default, sending of redirect messages on the interface is enabled.
Note: This command is executed from the Serial, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip redirects
Example
X330WAN-2DS1-1(super-if:FastEthernet1)# ip redirects

ip rip authentication key (Interface context)

Use the
used on the interface. The no form of this command clears the password.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
[no] ip rip authentication key <password>
Parameters
password
Example
X330WAN-2DS1-1(configure)# ip rip authentication key hush-hush
182
ip rip authentication key
The authentication string for the interface. Up to 16 characters are
allowed.
command to set the authentication string
Avaya X330WAN User's Guide