Duplex (Fastethernet Interface Context); Interface Fastethernet - Avaya X330WAN User Manual

duplex (FastEthernet interface context)

Use the
duplex
Note: This command functions only in
Syntax
duplex {full|half}
Parameters
full
half
Example
X330WAN-2DS1-1(config-if:FastEthernet1)# duplex full

interface FastEthernet

Use the
Fast Ethernet
interface. The
Syntax
[no] interface FastEthernet [interface number[.ip-interface]]
Parameters
interface number
ip-interface
Example
X330WAN-2DS1-1(configure)# interface FastEthernet 1
X330WAN-2DS1-1(configure)# interface FastEthernet 1.1
X330WAN-2DS1-1(configure)# no interface FastEthernet 1.1
Avaya X330WAN User's Guide
command to control the duplex setting for the interface.
Full duplex.
Halp duplex.
interface FastEthernet
context. For LAN interfaces, use this command to create the
form of this command deletes an IP interface.
no
An integer with a value of 1.
The IP interface number within this interface (a number of
IP interfaces may be bound to a Layer 3 interface). An
integer from 0 to 1024.
Fast Ethernet Interface CLI Commands
mode.
no autoneg
command to create and/or enter
interface
113