N2836A Infiniimax Iii Solder-In Probe Head - Keysight N2800A User Manual

N2836A InfiniiMax III Solder-in Probe Head

The N2836A InfiniiMax III solder-in probe head is an economical semi-permanent
connection that provides up to 26 GHz of system bandwidth. The span of the leads can be
adjusted from 5 mil - 250 mil (0.127 mm - 6.35 mm).
To use the head's InfiniiMode capability, use this head with N2830A-series probe
amplifiers. InfiniiMode allows you to make differential, common mode, and single ended
measurements without having to re-solder the tip leads.
Figure 30 N2836A InfiniiMax III solder-in probe head
For information on mechanically securing the probes to protect your equipment and
designs from damage, refer to
N OT E
Figure 31 Probe Head Connection to DUT
InfiniiMax III Series Probes User's Guide
"Strain Relieving the Probe Heads"
To install or repair the N2836A resistor leads, refer to
Tips" on page 50.
InfiniiMax III Probe Heads
on page 46.
"Replacing Axial Resistor
2
35