Keysight N2800A User Manual page 23

Figure 16 Improper Probe Handling
Do not apply too much force when browsing. The weight of the probe in your hand should be
CAUTION
sufficient. The axial travel of the probe is about 15 mils (0.4 mm).
The browser's protective cap should be kept on the browser at all times except when probing.
CAUTION
Always remove the browser from the device under test (DUT) before disconnecting the probe
CAUTION
amp from the oscilloscope.
Replaceable Parts
Figure 17
Figure 17 Browser Tips and Ground Blade
InfiniiMax III Series Probes User's Guide
shows the replaceable parts for th N5445A.
InfiniiMax III Probe Heads
2
23