Keysight N2800A User Manual page 22

2
InfiniiMax III Probe Heads
Mounting the Browser
There are two holes on the back side of the browser. Use these holes to mount the browser
to a customer designed holder.
holes.
Figure 14 Dimensions of Mounting Holes
Probe Along the Browser's Axis
To prevent tip damage, probe along the browser's axis as shown in
probe vertical and perpendicular to the circuit board.
Figure 15 Proper Probe Handling
To avoid damaging the browser's tips, do not apply a side load to the browser.
CAUTION
22
Figure 14 below shows the dimensions of these mounting
Figure 15. Hold the
InfiniiMax III Series Probes User's Guide