Keysight N2800A User Manual page 37

Figure 34 Tin the Leads
3 Use tweezers to form the probe head wires to fit your DUT's geometry.
4 Flux the DUT leads and your probe head wires.
Figure 35 Applying Flux to Leads and Wires
5 Position the probe head wires on the DUT leads and quickly re-flow the solder as shown in
Figure
Do not leave the iron in contact with the probe head for more than a few seconds at a time.
CAUTION
Figure 36 Positioning Wires
InfiniiMax III Series Probes User's Guide
36.
InfiniiMax III Probe Heads
2
37