Keysight N2800A User Manual page 71

4 Connect the probe amplifier to one of the channel inputs on the oscilloscope.
5 Insert the amplifier into the top of the fixture holder. The amplifier can slide up and down in
the holder to adjust the probe head position.
Always wear an ESD wrist strap when working with active probes. Not doing so can result in
CAUTION
the probe becoming permanently damaged.
6 Before connecting to the N5443A fixture, form the N5439A probe head ZIF tip wires as
shown below (if using the ZIF tip for the calibration / deskew). If you are using the browser
probe head then you do not need to adjust the shape of the tips.
InfiniiMax III Series Probes User's Guide
Calibration / Deskew Procedure
5
71