Keysight N2800A User Manual page 14

1
Using InfiniiMax III Series Probes
When connecting a probe head to a probe amplifier, push straight in. When disconnecting a
CAUTION
probe head from an amplifier, pull the probe head connectors straight out of the sockets.
Never bend the probe head in order to pry it loose from the amplifier. Also, do not wiggle the
probe head up and down or twist it to remove the connectors from the sockets. This can
damage the pins in the amplifier or the probe head itself.
Figure 8
Disconnecting a Probe from an Oscilloscope Channel
Always disconnect the probe head from the probe amplifier before:
•
•
Never allow the probe head to be connected to the probe amplifier, if the probe amplifier is not
CAUTION
connected to the oscilloscope channel.
14
Probe Head Connected to Probe Amplifier
disconnecting the probe amplifier from the oscilloscope.
switching the probe amplifier from one oscilloscope channel to another.
InfiniiMax III Series Probes User's Guide