Keysight N2800A User Manual page 47

Low-temperature Hot Glue
You can also use low-temperature hot glue to secure cables.
Only use LOW temperature hot glue. To remove the hot glue, warm it with a heat gun set on
CAUTION
low. Only heat the hot glue enough to remove it.
Figure 48 Using low-temperature hot glue to secure a probe head
General Tips on Strain Relief
Keep in mind that different accessories have different cable stiffness. You should choose a
strain relief method appropriate for the cable stiffness. For instance, it is best to secure the
stiffer N5439A near the SMP connectors and form the cable to the optimal location.
Other strain-relief options like tape or hook-and-loop work fine as well, but keep the
following guidelines in mind to protect your probing investment.
Do not kink cables. Do not crush cables. Do not use aggressive adhesives or high
CAUTION
temperatures.
Table 5
Part
Extra wire (for solder-in probe head only)
Strain Relief Putty
InfiniiMax III Series Probes User's Guide
Replaceable Parts
InfiniiMax III Probe Heads
Part Number
01169-81301 (7 mil)
01169-21306 (5 mil)
N5439-65201
2
47