9
Press the Menu button on the probe amplifier to bring up the Probe Setup dialog box on
the oscilloscope.
10
In the Probe Setup dialog box, click on the Calibrate Probe ... button. This will open the
Probe Calibration dialog box.
11
In the Probe Calibration dialog box, select the probe head you are using in the Head Label
(Type) field, select the Calibrated Atten/Offset radio button, and press the Start
Atten/Offset Calibration... button.
InfiniiMax III Series Probes User's Guide
Calibration / Deskew Procedure
5
73