Calibration / Deskew Procedure - Keysight N2800A User Manual

Keysight InfiniiMax III Series Probes
User's Guide
5 Calibration / Deskew
Procedure
To perform a calibration/deskew for the InfiniiMax III Probing system, you will be using the
N5443A Calibration/Deskew Fixture.
This fixture enables you to not only calibrate / deskew your InfiniiMax III probe, but it also
ensures you properly position the probe amplifier during the procedure via the plastic
holder. You can remove the plastic holder from the fixture by removing the four screws on
the bottom side of the holder if you prefer.
69