Oscilloscope Compatibility; Handling The Probe - Keysight N2818 User Manual

Using the Probe

Oscilloscope Compatibility

Handling the Probe

6
The N2818A and N2819A probes are compatible with the Keysight
oscilloscopes shown in
oscilloscope at the same time. The table also lists the minimum required
firmware version for the oscilloscope.
The N2818A and N2819A probes are designed for oscilloscopes with
NOTE
50Ω AutoProbe-interface channel inputs. The AutoProbe interface
provides the power to the probe.
Is Your Oscilloscope Software Up-to-Date? Keysight periodically releases
software updates to support your probe, fix known defects, and
incorporate product enhancements. To download the latest firmware, go
to www.keysight.com
"Drivers, Firmware & Software" tab.
Table 2
Oscilloscope
Infiniium Oscilloscopes
90000 Q-Series
90000 X-Series
90000A
9000 H-Series
9000A-Series
InfiniiVision Oscilloscopes
4000 X-Series
3000 X-Series
Handle the probe with care and refer to the safety notices in this manual.
Note that the probe cable and the extreme temperature extension cables
are sensitive parts and, therefore, you should be careful not to damage
them through excessive bending or pulling. You should also avoid any
mechanical shocks to this probe in order to guarantee accurate
performance and protection.
Table 2. Up to four probes can be connected to the
and search for your oscilloscope's topic. Click on the
Compatible Oscilloscopes and Support
Required
Firmware Version
≥ 4.30
≥ 4.30
≥ 4.30
≥ 4.30
≥ 4.30
≥ 3.20
≥ 2.35
Keysight N2818/9A Differential Probes User Guide
Adapter Required
N5442A
N5442A
—
—
—
—
—