1-4-2. Turning On/Off the TV Monitor Together With the Communication
If you use a Sony TV, insert the IR repeater under the remote sensor of the TV. Once you set the IR
repeater, the TV will turn on or go to standby together with the Communication Terminal when you press
the I/O button on the supplied Remote Commander.
(PLUG IN POWER)
to IR OUT
If the TV monitor is not turned on by pressing the I/O button on the Remote Commander, change the "IR
Repeater Mode" setting in the General Setup menu.
For details on the "IR Repeater Mode" setting, see "General Setup Menu" on page 1-18.
IR repeater (supplied)