Sony IPELA PCS-G50 Operating Instructions Manual page 85

2 Select the LAN bandwidth.
V, v, B or b
Use the
PUSH ENTER button. Press the
the displayed submenu, then press the PUSH ENTER button.
When using the ISDN
1 Enter the telephone number of a remote party to connect to in the A text box.
V, v, B or b
Use the
box, then press the PUSH ENTER button. Then enter the telephone number
with the number buttons on the Remote Commander.
Notes
• Do not enter the prefix number in the telephone number text box, when the prefix
setting is on.
• For details on prefix settings, see "Dial Setup Menu" on page 47.
• Even when you connect multiple ISDN lines (2B or more number of lines),
entering one telephone number of the remote party enables you to connect all the
lines used automatically.
• When you select ISDN (2B), the A1 and A2 text boxes appear. If you select the
A2 text box after entering an ISDN line number in the A1 text box, you can enter
a different ISDN number in the A2 text box. Pressing the PUSH ENTER button
on the Remote Commander copies the number entered in the A1 text box to the
A2 text box.
• To correct the entered number, press the PinP (BACK SPACE) button on the
Remote Commander. The last entered number is deleted.
• To delete the entered ISDN telephone number, press the DISPLAY (CLEAR)
button on the Remote Commander.
2 Select the number of channels connected when setting up a call.
V, v, B or b
Use the
of Lines", then press the PUSH ENTER button. Press the
select the number of channels to be used when calling a remote party from
the displayed submenu, then press the PUSH ENTER button.
button to select "LAN Bandwidth", then press the
V v
or button to select the bandwidth from
button on the Remote Commander to select the A text
button on the Remote Commander to select "Number
Starting a Conference by Calling a Remote Party
V v
or button to
85