Turning On/Off The Tv Monitor; Together With The Communication Terminal - Sony PCS-1 Operating Instructions Manual

• If battery leakage occurs, clean the battery compartment and replace all the
batteries with new ones.
Turning On/Off the TV Monitor Together With the Communication
Terminal
If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
Remote Commander.
CAMERA UNIT MIC
(PLUG IN POWER) ISDN UNIT
1 2
100BASE-TX
10BASE-T
DSB
IR OUT
1 2
to IR OUT
Note
If the TV monitor is not turned on by pressing the
Commander, change the "IR Repeater Mode" setting in the General Setup menu.
For details on the "IR Repeater Mode" setting, see "General Setup Menu" on
page 44.
22
Preparing the System
WHITE
BOARD
DC 19.5V
/ button on the supplied
" 1
TV monitor
Remote sensor
IR repeater (supplied)
@ 1
/ button on the Remote