And Isdn For Multipoint Data Conference - Sony IPELA PCS-G50 Operating Instructions Manual

System Configuration via a LAN and ISDN for Multipoint Data
Conference
Installing the optional PCSA-M3G50 H.323 MCU software, the PCS-M0G50
H.320 MCU software, and using the optional Data Solution Box PCS-DSB1S
and ISDN Units PCSA-B384S, or PCSA-B768S enables you to conduct
multipoint mixed LAN and ISDN line multipoint data conferences. Two
Communication Terminals where the MCU software is installed must be
connected via a LAN in this configuration.
This allows you to:
• Hold a multipoint videoconference among up to six sites over ISDN.
• Show still images stored on a "Memory Stick".
• Use data from a computer or other such peripheral device in the
videoconference.
• Show still images or computer data on the second monitor or projector used
as the display device.
• Connect up to five external microphones to the Data Solution Box, allowing
you to hear several participants.
System configuration
1 PCS-PG50/PG50P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit
3 PCS-RG70 Remote Commander
4 Remote Control Receiver
5 TV monitor (not supplied)
6 PCSA-M3G50 H.323 MCU software (not supplied)
7 PCSA-DSB1S Data Solution Box (not supplied)
8 PCS-A1 Microphone
9 PCSA-M0G50 H.320 MCU software (not supplied)
0 PCSA-B384S or PCSA-B768S ISDN Unit (not supplied)
*
Be sure to connect two
Communication Terminals, with
the MCU software installed, via
a LAN.
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.
System Configuration
23