Sony IPELA PCS-G50 Operating Instructions Manual page 179

When PCSA-M0G50 H.320 MCU software (for ISDN) is installed
Select "ISDN" or "TEL", and enter the line numbers or phone numbers of all the
parties for the multipoint videoconference in text boxes A to E.
When both PCSA-M3G50 H.323 MCU software (for LAN) and PCSA-
M0G50 H.320 MCU software (for ISDN) are installed
Select Multipoint and a drop-down list is displayed to the right of text boxes A to E.
When using a LAN, select "IP" from the drop-down list, and enter the IP address.
When using ISDN, select "ISDN" from the drop-down list, and enter the line
number.
When using ISDN (Telephone), select "TEL" from the drop-down list, and
enter the telephone number.
Enter all the parties for the multipoint videoconference.
For details on the setups, see step 5 in "Registering a New Remote Party"
on page 72.
5
Press the V or v button to select "Save", then press the PUSH ENTER
button.
The registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
2
Press the
ENTER button to open the submenu, press the V or v button to select "
On", then press the PUSH ENTER button.
button on the Remote Commander, or press the PUSH
Setting for a Multipoint Videoconference
179