For Multipoint Data Conference - Sony IPELA PCS-G50 Operating Instructions Manual

System Configuration via an ISDN for Multipoint Data Conference
You need to connect the optional PCSA-B384S, or PCSA-B768S ISDN Unit
and the PCSA-DSB1S Data Solution Box especially designed for use with this
System and to install the optional PCSA-M0G50 H.320 MCU software.
This allows you to:
• Hold a multipoint videoconference among up to six sites over ISDN.
• Show still images stored on a "Memory Stick".
• Use the data from a computer or an external equipment.
• Show the data from a computer or still images on the second TV monitor or
projector.
• Pick up a large number of participants' voices using up to five external
microphones connected to the Data Solution Box.
System configuration
1 PCS-PG50/PG50P Communication Terminal
2 PCSA-CG70/CG70P Camera Unit
3 PCS-RG70 Remote Commander
4 Remote Control Receiver
5 TV monitor (not supplied)
6 PCSA-M0G50 H.320 MCU software (not supplied)
7 PCSA-B384S or PCSA-B768S ISDN Unit (not supplied)
8 PCSA-DSB1S Data Solution Box (not supplied)
9 PCS-A1 Microphone
22
System Configuration
*
The illustration shows an
example using the PCSA-B768S
ISDN Unit.