Using the Cascade Connection via LAN (Up to 10 Points)
Installing the optional PCSA-M3G50 H.323MCU software in two
Communication Terminals enables cascade connection, allowing you to
conduct a multipoint videoconference with up to ten points.
PCSA-M3G50
H.323 MCU
software
Notes
• Installing the PCSA-M3G50 H.323 MCU software into three or more
Communication Terminals does not allow cascade connection. Note that the third or
later terminals should set "Multipoint Mode" to "Auto" on page 4 of the
Communication Setup menu.
• For cascade connection, the "Split" and "Split (Fixed)" modes are not available. Only
the "Voice Activate" mode is available.
170
Connection Examples for a Multipoint Videoconference
PCSA-M3G50
H.323 MCU
software