Sony IPELA PCS-G50 Operating Instructions Manual page 37

4
Use the V, v, B or b button on the
Remote Commander to select "Next",
then press the PUSH ENTER button.
The ISDN Setup Wizard appears when
the PCSA-B384S or PCSA-B768S
ISDN Unit is connected.
When the ISDN Unit is not connected,
the LAN Setup Wizard is displayed.
Proceed to step 11.
5
Set the following items on the ISDN
line.
Country/Region: Select your country
or region.
Protocol: Select the protocol of the
ISDN line you are using.
6
Use the V, v, B or b button to select
"Next", then press the PUSH ENTER
button.
7
Enter the telephone number of the
ISDN used by the system.
When you use one ISDN line, enter the
same number both in the A1 and A2 text
boxes (except for the USA and Canada).
Setting Up the System for the First Time — Initial Setup Wizard
Area Code: Enter the area code. Do not
enter the first "0" number.
Local Number: Enter the telephone
number.
Notes
• When you select a blank text box and
press the PUSH ENTER button on the
Remote Commander, the content in the
text box immediately above will be
copied to the selected text box.
• When you use the PCSA-B384S ISDN
unit and connect 2 or 3 ISDN lines,
enter the telephone numbers in the B1
to C2 text boxes in addition to the A1
and A2 boxes.
• When you use the PCSA-B768S and
connect 2 to 6 ISDN lines, enter the
telephone numbers in the B1 to F2 text
boxes in addition to the A1 and A2
boxes. To open the menu with D1 to
F2 text boxes, select "Next", then
press the PUSH ENTER button.
When you select Auto SPID (only
for customers in the USA and
Canada)
You can automatically set up the Area
Code and Local Number on this page,
and SPID items in the SPID menu.
8
Use the V, v, B or b button to select
"Next", then press the PUSH ENTER
button.
9
Enter the sub-addresses.
Only numbers are available for a sub-
address.
37