Sony IPELA PCS-G50 Operating Instructions Manual page 74

2 Select the number of the ISDN
channels to be used for dialing.
6
Select the icon or a still image stored
on a "Memory Stick" to be registered
in the Phone Book.
B b
Press the or button to select the icon
or a still image, then press the PUSH
ENTER button.
Note
You cannot select a still image unless a
"Memory Stick" in which the still image is
stored is inserted.
7
Use the V, v, B or b button to select
"Save", then press the PUSH ENTER
button.
The settings are registered in the Phone
Book.
Note
If the "Index" field is left blank when the
settings are registered, the IP address or
line number is used as the name.
To connect to the remote party
without using bonding
If the videoconferencing system of the
remote party is not equipped with the
bonding function, entering one telephone
number does not allow you to connect all the
line numbers used to connect to the remote
party. To connect to the remote party by
entering all the ISDN line numbers used,
you can set the connection without using the
bonding function of this system.
Set "More Options Enable" to "On" in the
Dial Setup menu (page 47), select the More
Options button at the lower part of the List
Edit menu to open the Dial Setup menu, then
set "Bonding" to "Auto". The A1, A2, B1,
B2, C1 and C2 text boxes appear in the List
74
Registering a Remote Party – Phone Book
Edit menu. Enter all the telephone numbers
for the ISDN lines selected by "Number of
Lines". Up to 6B-channel connection is
available when using this method.
Note
When you set "Number of Lines" to "2B", you
can connect to the remote party by selecting
"ISDN (2B)" from "Line I/F" in the Detail
Dial menu.
To set up more detailed options
When "More Options Enable" is set to "On"
in the Dial Setup menu, the More Options
button is shown at the lower part of the List
Edit menu.
Select the More Options button with the
v, B or b
button on the Remote Commander
and press the PUSH ENTER button to open
a menu for more detailed dial settings. You
can change the settings of the desired items.
Note
The contents set with the More Options button
have priority over those set in the Detail Dial
Setup menu.
V,