Turning Off; Adjusting The Volume On The Tv Monitor - Sony IPELA PCS-G50 Operating Instructions Manual

Turning Off

1
Open the front panel of the Communication Terminal, and then slide the
power switch on the right to the off position ( ).
2
Turn off the power of other equipment used for the videoconference.
Note
Set the power switch on the Communication Terminal off when the system will not be
used for an extended period. While the power switch is off, you cannot receive a call
from a remote party.

Adjusting the Volume on the TV Monitor

Before adjusting the volume on the TV monitor, set the volume on the
Communication Terminal to the appropriate position.
1
Press the VOLUME +/– buttons on the Remote Commander to set the
volume level on the adjustment bar displayed on the screen to the middle
position.
2
Adjust the volume on the TV monitor so that you can properly hear a
remote party speaking.
To adjust the picture on the TV monitor
Use the controls on the TV monitor to adjust the picture, hue, contrast,
brightness or sharpness.
For details on picture adjustments, refer to the Operating Instructions of the
TV.
Note
Do not activate the TV's surround sound feature as it may cause the echo canceller of
the Communication Terminal not to function properly and make strange sounds.
34
Turning the System On/Off