Sony IPELA PCS-G50 Operating Instructions Manual page 156

For details about the settings concerning video output from each output
connector, see "Displaying the Picture on a Projector or Monitor" on page
157, and the Video Setup menu "Monitor Out" on page 55.
When the PCS-11/11P is used as a receiving terminal
Resolution Video
frame
rate
a
a
When a videoconferencing system other than the PCS-G50/G50P or
PCS-11/11P such as the PCS-1600 is used
Resolution Video
frame
rate
a f
156
Using Audio/Video Signal from the Connected Equipment for a Conference
Remarks
Outputs the signal by converting a transmitted VGA, SVGA or XGA
signal into a 4CIF signal. The original high-resolution picture cannot be
obtained and details cannot be clearly seen. The number of frames
displayed per second depends on the interface transmission rate. For
example, one frame per second is obtained at 1 Mbps.
Remarks
Sends and receives the pictures in 4CIF, and the original high-resolution
picture cannot be obtained and detailed portion cannot be clearly seen.
The number of frames displayed per second depends on the interface
transmission rates. For example, one frame per several seconds is
obtained.
a f
: High, : Middle, : Low
a f
: High, : Middle, : Low