Sony IPELA PCS-G50 Operating Instructions Manual page 120

To send a still image
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
2
Display the picture you want to send on the monitor screen.
Press the VIDEO INPUT SELECT button on the Remote Commander to
display the Video Input Select menu, then select "AUX1" under "VIDEO IN",
and press the PUSH ENTER button.
Notes
• Still images can only be sent from the device connected to the AUX IN connector.
• Selecting "IR 1" allows you to display images input from the optional PCS-
DS150/DS150P Document Stand on the monitor.
• If you label "Main Camera", "IR 1", or "AUX1" in Custom Input Label in the
Video Setup menu, the specified name for each camera is displayed in the Video
Input Select menu.
3
Use the V, v, B or b button on the Remote Commander to select "Send",
then press the PUSH ENTER button.
The motion picture on the monitor screen freezes, and a still picture is sent to
the remote party. The still picture remains even after sending.
To cancel the still image display on the answering site
Select "Clear", or switch the input picture.
120
Sending motion pictures from the connected external equipment as still images
(still image) icon with the V or v button.