Sony IPELA PCS-G50 Operating Instructions Manual page 129

To change the images displayed in a dual monitor setup
You can display the following on the monitors during communication in a dual
monitor setup.
First monitor
First monitor
You can display either local or remote camera video.
When alternating between local and remote video, press the FAR/NEAR
button of the Remote Commander, and then make the appropriate selection on
the display control menu that appears.
Second monitor
You can display local camera video, received or transmitted still images, RGB
images transmitted through the Data Solution Box PCSA-DSB1S, or
whiteboard images.
Each time that you press the DISPLAY button of the Remote Commander, the
display changes.
Note
If there is no RGB or still image feed, it is not possible to alternate the display as
outlined above.
Local party
Remote party
FAR/NEAR
button
Remote party
Local party
Second monitor
DISPLAY button
Using Multiple Monitors
Remote
picture
Still image
RGB image
Picture on a
whiteboard
129