Turning On/Off The Tv Monitor Together With The Communication; Terminal - Sony PCS-1 Operating Instructions Manual

Turning On/Off the TV Monitor Together With the Communication

Terminal

If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
Remote Commander.
CAMERA UNIT MIC
ISDN UNIT
(PLUG IN POWER)
1 2
100BASE-TX
10BASE-T
DSB
IR OUT
1 2
to IR OUT
Note
If the TV monitor is not turned on by pressing the
Commander, change the "IR Repeater Mode" setting in the General Setup menu.
For details on the "IR Repeater Mode" setting, see "General Setup Menu" on
page 50.
28
Preparing the System
WHITE
BOARD
DC 19.5V
" / 1 button on the supplied
TV monitor
Remote sensor
IR repeater (supplied)
@ 1
/ button on the Remote