Information Menu - Sony IPELA PCS-G50 Operating Instructions Manual

Enter the SPID in the A1 text box only.
Page: 6/7
SPID
A1: 019876532001
A2:
B1:
B2:
C1:
C2:
For the NTI DMS-100 (National ISDN),
NTI DMS-100 (Custom ISDN), AT&T
5ESS (National ISDN) switch type
Enter the different SPID numbers in the
A1 and A2 text boxes.
Page: 6/7
SPID
A1: 019876543001
A2: 019876544001
B1:
B2:
C1:
C2:
For the AT&T 5ESS (Point-to-Point
Custom ISDN) switch type
You do not need to set up the SPID, then
no entry in the A1 and A2 (B1 and B2,
C1 and C2, depending on the number of
lines you use) is required.
Note
If you use the PCSA-B768S ISDN unit and
connect 4-6 ISDN lines, the D1-F2 text
boxes are shown in pages 3 and 7 of the
ISDN Setup menu. Fill in the boxes
following steps 3 and 4.
5
After the settings are completed,
select "Save", then press the PUSH
ENTER button.
70
Registering Local Information
ISDN
Save Cancel
ISDN
Save Cancel

Information Menu

The Information menu shows the versions of
the Communication Terminal and the
connected equipment for exclusive use,
installed software versions, etc.
Information
Ver X.XX
Host Version
Ver X.XX
ISDN UNIT Version
Ver X.XX
DSB Version
DSP Version Ver X.XX
Software Option Multipoint(H.320+H.323)
DSB, ISDN UNIT
Option I/F
PCS-G50
Host Name
0. 0. 0. 0
IP Address
MAC Address 00-00-00-00-00-00-00
Serial Number 12345
Host Version
Displays the software version of the
Communication Terminal.
ISDN UNIT Version
Displays the version of the connected
PCSA-B384S or PCSA-B768S ISDN Unit.
DSB Version
Displays the version of the connected
PCSA-DSB1S Data Solution Box.
DSP Version
Displays the version of the built-in DSP
(Digital Signal Processor) for audio/video
codec.
Software Option
Displays the optional software installed.
None: No optional software is installed.
Multipoint (H.323): The PCSA-M3G50
H.323 MCU software (for LAN) is
installed.
Multipoint (H.320): The PCSA-M0G50
H.320 MCU software (for ISDN) is
installed.
Multipoint (H.320 + H.323): Both the
PCSA-M0G50 and PCSA-M3G50
MCU software are installed.
SIP: The PCSA-SP1 SIP software is
installed.
Multipoint (H.323), SIP: The PCSA-
M3G50 MCU software and PCSA-SP1
SIP software are installed.
End