Saving Still Images To A "Memory Stick; Saving Still Images Using The Still Image Menu - Sony IPELA PCS-G50 Operating Instructions Manual

Saving Still Images to a "Memory Stick"

You can save the picture shot by the local camera or input picture from the
connected equipment or the remote picture during conference on a "Memory
Stick".

Saving Still Images Using the Still Image Menu

1
Open the Communication Terminal front panel, and then insert the
"Memory Stick" used to save images into the Memory Stick slot.
2
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
3
Display the picture you want to save on the monitor screen.
To display the picture on the local site, press the VIDEO INPUT SELECT
button on the Remote Commander to display the Video Setup menu, and then
select the video input you want to display.
To display the remote picture, switch to the picture on the remote site with the
FAR/NEAR button on the Remote Commander, and select the desired picture.
For details on the Video Setup menu, see "Video Setup Menu" on page 55.
4
Use the V, v, B or b button on the Remote Commander to select "Save",
then press the PUSH ENTER button.
The picture displayed on the monitor screen will be saved as a still image to the
"Memory Stick".
Notes
• Do not remove the "Memory Stick" until the data is completely loaded. If you do, the
"Memory Stick" may be damaged or the Communication Terminal may cause a
malfunction.
• A still image file is saved as a new file. It will not be overwritten.
(still image) icon with the V or v button.
Saving Still Images to a "Memory Stick"
121