Features - Sony IPELA PCS-G50 Operating Instructions Manual

Features

The PCS-G50/G50P Video Communication
System is a videoconferencing system that
provides natural, face-to-face
communications with a remote party by
transmitting and receiving images and sound
via LAN (Local Area Network) or ISDN
(Integrated Services Digital Network)
connections.
Supports ITU-T international
videoconferencing standard
The Video Communication System
complies with ITU-T Recommendations
defined by WTSC for easy connection with
remote parties overseas.
ITU: International Telecommunication
Union
WTSC: World Telecommunications
Standardization Committee
Supports data conferences
Use of the optional PCSA-DSB1S Data
Solution Box allows the data from a personal
computer to be incorporated in the
presentation or to be shown on the projector.
High transmission speeds and
high-quality picture capability
The Video Communication System accepts
a LAN bandwidth of up to 4 Mbps. It also
allows you to connect to as many as three
ISDN lines and use 6B channels with the
optional PCSA-B384S ISDN Unit, and as
many as six ISDN lines and use 12B
channels with the optional PCSA-B768S
ISDN Unit.
Wide range of video/audio
compression format selectable
The Video Communication System supports
H.264, H.263 4CIF, H.263, H.261, MPEG4,
interlaced SIF (H.264/H.263) video
compression formats. It also supports
MPEG4 AAC, G.722.1, G.722, G.729,
G.728, G723.1, and G.711 audio
compression formats.
10
Features
QoS (Quality of Service) function
for optimization of bandwidth and
traffic packet through network
This system includes the "Packet Resend
Request", "Adaptive Rate Control", and
"Forward Error Control" functions.
Depending on the network status, these
functions are used in Hybrid to guarantee
consistent, high-quality communications.
Easy setup and operation
Help is displayed on the monitor when you
need guidance. The menus used by the
system administrator or those by conference
participants are displayed separately.
Supports multipoint conference
Installing the optional PCSA-M3G50 H.323
MCU software (for LAN) or the
PCSA-M0G50 H.320 MCU software (for
ISDN) allows conduct of a multipoint
conference.
The multipoint conference via LAN and
ISDN connections mixed is also available if
both the PCSA-M3G50 H.323 and
PCSA-M0G50 H.320 MCU software are
installed in a main terminal.
Equipped with a Memory Stick slot
The Communication Terminal is equipped
with a Memory Stick slot, allowing the use
of still images recorded with a digital still
camera and stored in the "Memory Stick".
Videoconference Recording
Video and audio from a videoconference can
be recorded to a "Memory Stick" and
watched on a computer after the
videoconference.
Triple monitor system
You can connect three monitors to the
Communication Terminal, which allows
you, for example, to display video from the
remote party, video from your terminal, and
video from a computer or whiteboard
simultaneously.