Sony IPELA PCS-G50 Operating Instructions Manual page 50

Page 2/3
Video Mode
Allows you to select the compression format of
pictures sent to a remote party. If you set
"Individual Settings" to "On" on page 1 of the
Communication Setup menu, you can perform
this setting individually for transmission,
reception, and multipoint conferencing.
Auto: Send pictures matching the format of
the remote site.
H.264: Send pictures based on the H.264
format.
MPEG4: Send pictures based on the
MPEG4 format.
H.263+: Send pictures based on the H.263+
format.
H.261: Send pictures based on the H.261
format (when sending still images using
Annex D).
SIP Video Off: Sends only audio
(no pictures) when connected by SIP.
Interlace Mode
Allows you to specify whether to use the
interlace SIF format in video mode.
Auto:Send video matching the format of the
remote site.
On: Use the interlace SIF format.
Off: Not to use the interlace SIF format.
4CIF Mode
Allows you to specify whether to use the 4CIF
format in video mode.
Auto: Send video matching the format of the
remote site.
On: Use the 4CIF format.
Off:Not to use the 4CIF format.
50
Registering Local Information
Video Frame
Allows you to select the number of video
frames during transmission. If you set
"Individual Settings" to "On" on page 1 of the
Communication Setup menu, you can perform
this setting individually for transmission,
reception, and multipoint conferencing.
Auto: Switch the number of frames
automatically.
15fps: Send CIF format pictures at a
maximum rate of 15 frames per second.
30fps: Send CIF format pictures at a
maximum rate of 30 frames per second.
Audio Mode
Allows you to select the compression format
of audio to be sent to a remote party. If you
set "Individual Settings" to "On" on page 1
of the Communication Setup menu, you can
perform this setting individually for
transmission, reception, and multipoint
conferencing.
Auto: Send audio matching the compression
format of the remote site.
MPEG4 Audio: Send audio based on the
MPEG4 AAC format.
G.722.1: Send audio based on the G.722.1
standard.
G.722: Send audio based on the G.722
standard.
G.729: Sends audio based on the G.729
standard.
G.728: Sends audio based on the G.728
standard.
G.723.1: Sends audio based on the G.723.1
standard.
G.711: Sends audio based on the G.711
standard.
Note
When the remote videoconferencing system
does not support the audio mode selected by
the local site, the mode automatically becomes
"G.711".
Restrict
Allows you to select the ISDN transmission
rate at dialing. If you set. "Individual
Settings" to "On" on page 1 of the
Communication Setup menu, you can
perform this setting individually for
transmission, reception, and multipoint
conferencing.