Attaching The Mimio Xi On The Whiteboard - Sony IPELA PCS-G50 Operating Instructions Manual

Attaching the mimio Xi on the
Whiteboard
Attach the mimio Xi at the upper left corner of a whiteboard vertically or
horizontally, then set the attachment orientation of the mimio Xi and the size
of the whiteboard using the menu.
Vertically
To set the attachment orientation of the mimio-Xi
According to the orientation of the mimio Xi, set "Whiteboard Attachment" to
"Vertical" or "Horizontal" in "Whiteboard" of the General Setup menu (page
56).
To specify the whiteboard size to be used
After selecting "Inches" or "Meters" from "Whiteboard Size Measurement" in
"Whiteboard" of the General Setup menu, select the size of the whiteboard
from "Whiteboard Size" (page 59).
You can select one of the following sizes (height × width):
When you attach the mimio Xi vertically
2'0" × 3'0" (0.6 × 0.9 m), 3'0" × 4'0" (0.9 × 1.2 m), 4'0" × 6'0" (1.2 × 1.8 m),
4'0" × 8'0" (1.2 × 2.4 m)
When you attach the mimio Xi horizontally
3'0" × 2'0" (0.9 × 0.6 m), 4'0" × 3'0" (1.2 × 0.9 m), 6'0" × 4'0" (1.8 × 1.2 m),
8'0" × 4'0" (2.4 × 1.2 m)
Horizontally

Attaching the mimio Xi on the Whiteboard

161