Sony IPELA PCS-G50 Operating Instructions Manual page 210

g AUX IN connector (mini DIN 4-pin)
Connect to the video output of external
video equipment.
h DC 19.5V jack
Connect the supplied PCS-AC19V6 AC
power adaptor.
i IR OUT 1/2 jacks
Connect the supplied IR repeater.
Connect the IR repeater for the monitor
connected to the VIDEO OUT
MONITOR MAIN connector to the IR
OUT 1 jack, and the IR repeater for the
monitor connected to the VIDEO OUT
MONITOR SUB connector to the IR
OUT 2 jack.
j AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
k CTRL-S jack (minijack)
Connect to the optional Remote
Commander Signal Receptor.
The remote sensor of the Camera Unit
does not operate when this connector is
in use.
l
(ground) terminal
U
Connect a ground wire.
m VIDEO OUT AUX jack (phono
jack)
Connect to the video input of the TV
monitor or VCR.
n VIDEO OUT MONITOR 1
connector (mini DIN 4-pin)
Connect to the S-video input on the TV
monitor or VCR.
o VIDEO OUT MONITOR 2
connector (mini DIN 4-pin)
Connect to the S-video input on the
second TV monitor when the system
uses the dual monitor mode.
210
Location and Function of Parts and Controls
p EC-MIC jacks (1, 2)
Connect to an optional PCSA-A7
Microphone.
q RGB OUT connector (D-sub 15-
pin)
Connect to the RGB input of the
optional projector or display unit.
r WHITE BOARD connector
Connect to the optional mimio Xi.
s 100BASE-TX/10BASE-T connector
(8-pin modular)
Used to conduct a conference via a LAN
or an SIP. Connect to a hub or an SIP
server using the category 5 cable.
t DSB connector (D-sub 15-pin)
Connect to the TERMINAL connector
on the optional PCSA-DSB1S Data
Solution Box.
u ISDN UNIT connector
Connect to the TERMINAL connector
on the optional ISDN Unit such as
PCSA-B384S and PCSA-B768S.